Graphite Guitar Nut w/Slots for Fender Style Guitars
Description
- This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
- PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
- Length = 1 41/64 inches (41.52mm)
- Height #1 (fretboard side) = 13/64 inches (5.06mm)
- Height #2 (headstock side) = 13/64 inches (5mm)
- Thickness at bottom = 9/64 inches (3.46mm)
- Thickness at top = ⅛ inches (3.1mm)
Additional information
Weight | 1 oz |
---|
Eric A. Rogers –
Taken from Amazon.ca Customer
Reviewed in the United States on April 7, 2013
Great for tremolo guitars!
I’ve had good experiences with WD products. Their roller nuts are also a great cost-effective upgrade if you want your tremolo guitar to stay in tune. Graphite nuts have the advantage of being easier to install and they require less modification to your guitar neck than roller nuts.
tenoeight –
Taken from Amazon.ca Customer
Reviewed in the United States on July 12, 2013
good price great product
I have purchased several of these through the years they work great and are priced right. They are easy to install with little or no modifications. I have bought it before and I will buy it again.
Jenny –
Taken from Amazon.ca Customer
Reviewed in the United States on July 17, 2015
Nice replacement
nice replacement