Description
- Hosco replacement Telecaster body, made in Japan from North American three-piece alder with a center join.
- This body has been routed and shaped but has not received the final sanding.
- Typical weight is approximately 4 lbs 10 oz and comes routed for the traditional 2 Tele single-coil routes, control cavity, jack socket, and 6 bridge through-body-string holes.
- Pre-drilled for 4 neck mounting screws. 2 3/16″ (56mm) neck pocket. Thickness: 48 mm.
- Drilled for vintage spec bridge 2 2/16” and 3/8″ (9.5mm) flush fit ferrules. 3 earth holes, a bridge, and two pickups.
Alvino Chavez –
Taken from Amazon.ca Customer
Reviewed in the United States on March 2, 2020
Great tele body, good machining, one issue the thru-body ferrule holes are too big
Excellent telecaster body, but the ferrule holes in the back for the string-thru are too big for 2 sizes of ferrules I bought… I measured them and the closest thing I could find where 5/16 or something.. still too big. I wrapped them in felt tape and inserted them… might glue in… but they stay put once strings are installed anyway…
I”d like a press fit tight ferrule. otherwise great.