-
Sale!
- Gauge: 0.106”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
Sale!
- Thickness: 0.50mm. - Tooth spacing: 0.9mm. - Blade length: 15mm. - Total length: 160mm. - Angle Fret saw: 45º. -
- Grit: 180. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
- Grit: 400. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Size: 0.010. - Total length: 150mm. - Blade length: 115mm. -
Out of stock
- Handle: Wood. - Overall length: 300mm. - Head length: 75mm. - Head Diameter: 25mm. - Use: Fretworking. -
Sale!
- Handle: Japanese white oak. - Use: Fretworking. - Overall Weight: 300 gr. - Head Material: Solid Copper. - Overall length: 300mm. -
Out of stock
- Handle: Japanese white oak. - Head: Hexagonal. - Overall Weight: 225 gr. - Overall Length: 330mm. - Head diameter: 75mm. -
Out of stock
- Model: TDSN03. - Long: 690mm. - Width: 40mm. - Thickness: 3mm. - Made in Portugal. -
– Model: PPTM10. - Long: 150mm. - Height: 60mm. - Width: 25mm. - Made in Portugal. -
Out of stock
- Total Length: 190mm. - Blade Length: 60mm. - Blade Thickness: 0.2mm (0.0078”). - Blade Pitch: 0.3mm (0.012”). -
- Measurement range: 0 - 150mm ( 0 - 6 inches). - Mode: Dual Reading. - Material: Metal. -
Out of stock
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. -
Sale!Out of stock
600 mm precision ruler for the construction and repair of musical instruments. -
Out of stock
Shinex Sanding Wood Sheet 3000 grit, usable in both, water and oil. -
Out of stock
Shinex Sanding Wood Sheet 1500 grit, usable in both, water and oil. -
Grits: 150, 400, and 1000. Size: 65 x 18 x 9mm, 2 Fingerboard Guards, a String Spreader. -
Out of stock
Easy way to make your radius on fretboards. This one to fit Dewalt D26200 -
Out of stock
Easy way to make your radius on fretboards. This one to fit Dewalt D26200 -
Out of stock
- Size: Small (ukuleles and mandolins). - Length: 190mm (7.5″). - File length: 100mm (3.93″). - Radius: 1mm. - Made in Japan. -
- Use: Oire Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Material: These professional-grade chisels are made from high-carbon steel (White # 2 steel) laminated to low-carbon backing steel. - Blade Width: 42 mm. - Length: The overall length is approximately 216 mm (8.5"), Blade length is 60 mm / 2.36”. - Hardness: They harden to more than HRC 65 so they will maintain a sharp edge for much longer than a western equivalent chisel. - Handle: They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Out of stock
Easy way to make your radius on fretboards. This one to fit Dewalt D26200 -
Out of stock
This toolkit includes the following products:- Japanese Smooth Plane Kakuri – 48mm 318-480. - Tataki Nomi INM Japanese Chisels, 3 mm TL-INM3. - Guitar Tools International Flat Beveled Cork Sanding Block- Guitar Luthiers – LCBS2. - Double Sided Ceramic Combination Sharpening Stone – 1000/3000 – TG6310. - Ryoba Japanese Razorsaw Double Edge 180mm – Gyokucho – RZ-291. - Ryuzo Ryoguchi Hammer – 300g – 41201.
-
Out of stock
- Made out of high-grade alloy steel.
- The hardness of 50 Hrc done as per international standard for high torsional strength and high deformation resistance for long life.
-
Set of 3 Two-Way Sanding Block for the sanding frets and leveling fingerboards. -
Sale!Out of stock
- Model: TL-SCR-1C. - Use: Wood Scraping. - Shape: Curve. - Length: 150 mm. - Width: 55 mm - Thickness: 1 mm. - Material: Stainless steel. -
Out of stock
Bob Smith Industries ™ Extender Tip for CA glues. -
Out of stock
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must-have for luthiers! -
Out of stock
Hosco Nut Files set (3 pcs) for classic guitars, 0.030"/.038" - .032"/.042" - .035"/.046. -
Out of stock
- Handy pocket-size wrench quickly fixes loose jacks, pots, switches, and tuners
- Specially angled for clearance over a guitar body or peghead
-
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
Sale!
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
2-way sanding block for Ukuleles 16” (406mm) / Flat -
Out of stock
The Hosco original Double Edge Nut Files are tapered and V-shaped making this the perfect tool to slot the nut of your ukulele. -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut.
