- Hosco Bass Knob
- With set screw.
- Large
- Black
-
-
Pickguard mounting bracket for Les Paul® and similar solid body archtop guitars. -
- Model: SG381 MG AB07. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 20mm. - Hardware included: bushing, washers, and screws. - Finish Black. -
Relic Series products are limited to specific models and options. -
- Replacement pickguard for Jazz Bass
- 3-Ply
-
Hosco Metal Knob in Black finish Telecaster Style -
P-102B Back Plate for Les Paul style guitars. -
- CTS potentiometers: 500K audio taper configuration - Capacitors: Orange Drop polyester .022µF / 100V (2 units) - Copper shielding foil dimensions: 8" x 12” - Braided-shield wire: 22AWG inner conductor, 60” length - Push-back hookup wires: 22AWG white 12" and black 24” lengths -
- Designed for Gibson SG style electric guitar wiring configurations. - CTS 500K potentiometers for humbucker pickup applications. - Includes Hosco Made in Japan right-angle 3-way toggle switch. - Orange Drop .022µF 100V polyester capacitors included. - Cloth push-back wiring and copper shielding foil for low-noise installation. -
P-102I Back Plate for Les Paul style guitars. -
- Gavitt vintage cloth wire, supplied by Guitar Tools International - 22 AWG single conductor with tinned stranded construction - Yellow textile covering with push back insulation - One continuous 5-foot length / 1.524 meters - For internal guitar wiring, repairs, and custom builds
-
High-quality Bastard steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Standard Pick up P Bass Configuration, 3-Ply -
One volume and 2 tone replacement knobs for your Strat -
Set of 5 jacks with the metal nut. Centre pin 2.1mm -
Stomp-box effects switch 3PDT Blue - 9 pins -
Sale!
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mustard. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Green. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lime. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Sky. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mauve. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Pink. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Red. -
- Model: P365HCD-P. - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Orange. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lemon. -
Humbucker Pickup Model Impact Distortion High output and raw distorted heavy sound while retaining clarity. Extra coil windings produce fat sound while great harmonics can be jumped out of the amp! -
'- Medium Tension Cuatro strings - Made of Black Nylon - Made in USA -
Potentiometer 250K Logarithmic For audio control -
Important Dimensions - US and metric where applicable Length- 1 11/16 in., 43mmThickness- 5.9mm, .233 in.Height- 5/16 in. high at the highest point with a flat bottom -
- Vibrato Model: Bigsby® B5 Original (USA, non-licensed) - Configuration: Designed for flat-top solid body guitars (Tele-style) - Conversion System: GTI No-Drill Telecaster® Conversion Plate - Material: Die-cast aluminum vibrato unit with steel mounting plate - Finish: Chrome plated for durability and corrosion resistance -
Good stomp-box effects switch (Double Pole, Double Throw) -
- Length = 1 23/32 inches (43.75mm) - Height #1 (fretboard side) = 5/16 inches (7.81mm) - Height #2 (headstock side) = 9/32 inches (7mm) - Thickness at bottom = 15/64 inches (6.1mm) - Thickness at top = 3/16 inches (4.78mm) -
- Use: The fine teeth of the locking saw allow a precise cut of the curved shapes.
- The long and thin blade makes this a very versatile and practice tool.
- Total length: 337 mm.
- Blade length: 100 mm.
- Handle length: 130 mm.
- Blade thickness: 0.70 mm.
- TPI: 20 teeth per inch.
- Made in Japan.
-
The NUX WAC-001 power cord enables you to power up to 4 pedals. -
- Model: MG-T - SL.
- Tuner Configuration: 3 per side.
- Gear ratio: 15:1.
- Post Length: 20mm. - Bushing Type: Vintage press-fit (non-threaded), designed for push-in installation — no hex nut required
- Hardware included: bushings, washers, and screws.
- Finish: Nickel. -
Sale!
- Model: SD90 - SL. - Tuner Configuration: 3 per side. - Gear ratio: 15:1. - Post Length: 19.5mm. - Hardware included: bushings, washers, and screws. - Finish: Relic. -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
- Pickguard Style – Les Paul - Humbucker Cutout – 46 mm (1.8”) - Pickup Spacing – 57 mm (2.25”) - Thickness – 2 mm (0.08”) - Material – PVC (3-ply Black/White/Black) -
Sale!
BG strap for Tenor/Baritone saxophone comfort. Fast and secure adjustment. -
- BG kit Discovery for Clarinet DKC.
- Includes:
- 1 piece - A65 U - Pad Dryer.
- 3 pieces - A80 S - Reed Savers.
- 2 pieces - A10 S - Mouthpiece Cushions.
