-
- Model: 3D-5. - Support: Reels. - Configuration: 5 Strings. - Surface: Chrome. - Measures: Please look at the diagram in the pictures. - Weight g/item: 278. -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
– Model: SG301 – MG – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Black. -
Back Plate for Stratocaster Style Guitars 10.5mm pitch -
Sale!
- Use: Standard pickguard for acoustic guitars. - Pickguard Type: Teardrop. - Features: Self-adhesive back layer and protective front film. - Color: Transparent. - Material: Celluloid. -
- Grit: 180. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Good for repairing the finishing, This product is used to obtain a fine finish when repairing guitar bodies and necks, Grits #2500. -
- Size: Large (Guitars and basses). - Length: 190mm (7.5″). - File length: 100mm (3.93″). - Radius: 3 mm. - Made in Japan. -
- Size: 0.010. - Total length: 150mm. - Blade length: 115mm. -
Sale!
- Model: P203B-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Gold. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. -
Gotoh string ferrules Fits 8.3mm holes -
- Model: GE-101A. - Chrome finish. - Anchor bushings: M8x1.25, 25mm height. - Mounting Hole Center to Center: 82mm. - Measures: Please look at the diagram in the pictures. -
For use on 24 spline pots as commonly found on US-made guitars. -
600 Sanding Wood Sheet 600 grit, usable in both, water and oil. -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
Sale!
- Length approximately: 6 1/2" (165mm). - Blade width: 9mm. - Right Bevel. -
Japanese IKEUTI Carving Knife Right Bevel -
Sale!
- Model: SG381-P4N. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 20mm. - Hardware included: bushing, washers, and screws. - Finish Gold. -
Potentiometer 500K Linear For tone control. -
- Use: This saw is used to cut sheets to place incrustations in the wood.
- Total length: 365 mm.
- Blade length: 130 mm.
- Handle length: 130 mm.
- Blade thickness: 0.60 mm.
- TPI: 14 teeth per inch.
- Made in Japan.
-
- Model: SD91 - MG-T - 05M. - Tuner Configuration: 6 in a line. - Gear ratio: 15:1. - Post Length: 20mm. - Hardware included: bushings, washers, and screws. - Finish: Nickel. -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Back Plate for Stratocaster Style Guitars Black -
Nickel Bass Guitar String Bushing Ferrules Set (4), This set of 4 string ferrules are commonly used on string-thru-body basses mounted directly into the back of the instrument body where the strings pass through to the bridge. -
- Instrument: Electric Guitar. - Finish: Relic. - String Spacing: 10.8mm - Measures: Please look at the diagram in the pictures. - Mounting Hole Center to Center: 64.8mm. -
– Model: P203B-4. – Configuration: 4 Strings. – String Spacing: 19mm. – Saddle Material: Brass. – Instrument: Electric Bass. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
- Width: 41 mm (1-5/8″, R2 size) - Radius: 360 mm (≈14″) - Material: Hardened steel, top-mount design - Finish: Black - Made in Japan by Gotoh -
- Model: H-FF3HC - Fret Radius: 3 mm (for jumbo frets) - File Size (without handle): 100 × 20 × 4 mm - Coating: Hard Chrome - Handle: Red rubber non-slip grip - Material Compatibility: Stainless Steel Frets -
Sale!
- Size: 130 mm × 110 mm × 20 mm.- Material: EVA (Ethylene Vinyl Acetate).- Made in Japan.- Compatible with: Hosco Cassette Roll Paper, various abrasive sheets. -
Sale!
- TBP1: Bridge Stud hole diameter = 5/8 in. Bridge Stud hole spacing = 3 in. ctr to ctr Material = Steel.- BSS1: Center to Center Stud Spacing= 3 in. E to E String Spacing= 56mm String Pitch(adjustable)= 11.2 mm Body Insert Hole Diameter= 27/64 in. Metric Threaded Studs. -
Sale!
- Blade Length: Approximately 10 inches (250mm), providing ample cutting surface for efficient material removal. - Blade Width: 1.3 inches (33mm) at its widest point, ensuring stability and control during use. - Material: High-carbon steel with multi-directional cutting teeth for enhanced durability and precision. -
– Model: SD90-MG-T-SL
– Tuner Configuration: 3 per side.
– Gear ratio: 15:1.
– Post Length: 21.5mm. Not Staggered. They are suitable for Gibson Guitars and similar instruments with wide head necks.
– Hardware included: bushings, washers, and screws.
– Finish: Nickel. -
Sale!
- Vintage Leather Guitar Strap. - Dimensions: 50 inches/127 cm long. - Finish: Top Grain Brown. - Intended use: For Electric and Acoustic Guitar. -
- Model: 404BO-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Brass. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. - Plate Material: Hard Zinc. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Chrome Plated. - Material: Steel. -
- Material: Cork. - Edge: Beveled. - Length: 142mm. - Width: 81mm. - Thickness:52mm. - Use: Perfect to sand any surface. -
- Long: 230mm. - Width: 35mm. - Thickness: 3mm.
