- CTS potentiometers: 500K long shaft configuration
- Capacitors: Orange Drop polyester .022µF / 100V (2 units)
- Copper shielding foil dimensions: 8" x 12”
- Braided-shield wire: 22AWG inner conductor, 60” length
-
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance, Non- inductively wound polyester film/foil construction. Radial lead.10% tolerance, 100v voltage rating. Rated for 85°C operation. -
Sale!
- Finished necks are done in clear polyurethane
- 21 Small fret wire. Crown: 2.0mm(W) x 1.0mm(H).
-
Hosco Stereo Jack w/small terminals, Color: Nickel, For Guitar and Guitar Basses -
Sale!
Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing, Mono 2-Conductor. -
Output 9 volts / 1000mA. Equipped with a noise reduction circuit. Input voltage 100-240V. -
WD Music J-Bass Pickup Cover Square Shape This pickup cover is typically mounted over the top of both the strings and pickup, -
– Model: GTC-101. – Configuration: 6 string. – String spacing: 52.5mm. – Instrument: Electric Guitar. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
– Model: P203B-4. – Configuration: 4 Strings. – String Spacing: 19mm. – Saddle Material: Brass. – Instrument: Electric Bass. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: 3D-4. - Support: Reels. - Surface: Gold. - Measures: Please look at the diagram in the pictures. - Weight g/item: 267. -
Sale!
Wilkinson Alnico V telecaster pickup, Great combination for classical electric sound. -
Sale!
- Grit: 150. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Blade length with rib: 120mm. - Width: 0.60mm. -
Sale!
Japanese Fret Slot Cleaning saw, Hosco Brand - Made in Japan. -
Nickel Bass Guitar String Bushing Ferrules Set (4), This set of 4 string ferrules are commonly used on string-thru-body basses mounted directly into the back of the instrument body where the strings pass through to the bridge. -
- Flat-head design for clean fret removal with minimal damage.
- Precision-ground steel jaws for accurate grip under fret wire.
- Ergonomic non-slip handle for control and comfort.
- Made in Japan by Hosco – professional luthier-grade tool. - Note: Not intended for cutting wire – designed for pulling only. -
Sale!
- Truss rod box wrench 1/4" for truss rod hex nut. -
This is a real bone nut blank sized for vintage Fender® instruments. It has an equal radius on the top and bottom. Enhance your tone and increase your instruments sustain while adding a more durable and longer-lasting material to one of the most important contact points on your instrument. Please note this part comes without string slots and requires professional installation and modification using proper tools. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
'- Trapezoid Bone Nut Blank - Measures : 53 x 10 x 4,5/6 mm - Material: Bone - Made in Japan -
Hosco Control Plate for Telecaster with screws. -
Sale!
Truss Rod Washer for Gibson Guitar -
WD Music Electrosocket Jackplate For Telecaster -
- BG kit Discovery for Clarinet DKC.
- Includes:
- 1 piece - A65 U - Pad Dryer.
- 3 pieces - A80 S - Reed Savers.
- 2 pieces - A10 S - Mouthpiece Cushions.
-
Sale!
BG strap for Tenor/Baritone saxophone comfort. Fast and secure adjustment. -
Back Plate for Stratocaster Style Guitars Black -
For use on 24 spline pots as commonly found on US-made guitars. -
For use on 24 spline pots as commonly found on US-made guitars -
Sale!
Knob cover type selector Gibson Plastic -
- Pickguard Style – Les Paul - Humbucker Cutout – 46 mm (1.8”) - Pickup Spacing – 57 mm (2.25”) - Thickness – 2 mm (0.08”) - Material – PVC (3-ply Black/White/Black) -
Pickup Selector Switch Cap for Stratocaster. -
- Material: Aluminium. - Radius: 7.25", 9.5", 10" 12", and 16". - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Putting a radius on a fingerboard or leveling frets. -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Sale!
- Model: SD90 - SL. - Tuner Configuration: 3 per side. - Gear ratio: 15:1. - Post Length: 19.5mm. - Hardware included: bushings, washers, and screws. - Finish: Relic. -
- Handle: Japanese white oak. - Head: Hexagonal. - Overall Weight: 300 gr. - Overall Length: 332mm. - Head diameter: 26.5mm. -
The NUX WAC-001 power cord enables you to power up to 4 pedals. -
- Use: This saw is used to cut sheets to place incrustations in the wood.
- Total length: 365 mm.
- Blade length: 130 mm.
- Handle length: 130 mm.
- Blade thickness: 0.60 mm.
- TPI: 14 teeth per inch.
- Made in Japan.
-
- Use: The fine teeth of the locking saw allow a precise cut of the curved shapes.
- The long and thin blade makes this a very versatile and practice tool.
- Total length: 337 mm.
- Blade length: 100 mm.
- Handle length: 130 mm.
- Blade thickness: 0.70 mm.
- TPI: 20 teeth per inch.
- Made in Japan.
-
- Model: JTK-1 – Japanese Starter Toolkit - Includes: Kakuri Plane 48mm, Tataki Nomi Chisel 3mm, GTI Cork Sanding Block, TG6520 Sharpening Stone, Gyokucho Ryoba Saw, Ryuzo Hammer - Sharpening Stone: Double-Sided Ceramic – 2000 / 5000 Grit - Applications: Guitar Building, Repair, Setup, Fretwork, Woodworking & General Lutherie - Origin: Premium Japanese Tools & GTI Workshop Accessories -
– Model: PGHL-2. – Part Number: 609722145633. – Finish: Black. – Measures: Please look at the diagram in the pictures. -
- Length = 1 23/32 inches (43.75mm) - Height #1 (fretboard side) = 5/16 inches (7.81mm) - Height #2 (headstock side) = 9/32 inches (7mm) - Thickness at bottom = 15/64 inches (6.1mm) - Thickness at top = 3/16 inches (4.78mm) -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
- Brand: Musedo. Model: CP-63 - Type: Clip-On Contact Pickup - Pickup Design: Piezo Contact Pickup - Output Connector: 1/4" (6.35mm) Mono Plug. - Cable Length: Approx. 2.5m (8.2 ft.) - Maximum Clip Opening: Approx. 25mm - Power Requirement: None -
Important Dimensions - US and metric where applicable Length- 1 11/16 in., 43mmThickness- 5.9mm, .233 in.Height- 5/16 in. high at the highest point with a flat bottom
