-
Knob cover type selector Gibson Technical Features: Plastic -
Humbucker frame with universal holes for multiple configurations, This premium baseplate has a 50mm spacing and is made of raw nickel silver. -
Sale!
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
Sale!
- Gauge: 0.028”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- A set of 26 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
Sale!
Truss Rod Nuts bullet shape Length 25mm. -
Sale!
- Model: 35G1800 - 2M. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included. - Finish: Gold. -
Sale!
- Length: 56mm. - Height: 6mm. - Thickness: 10mm. - Brand: Guitar Tools International. - Finish: brass. -
Sale!
- Truss rod box wrench 7 mm for truss rod hex nut -
Sale!
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing lipstick pickups. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing lipstick pickups. -
Sale!
- Tolecut sheet: Each abrasive sheet has 8 self-stick squares - Kovax Finish Repair Set includes: 1 of each grit: 800, 1200,1500, 2000, 2500, and 3000-grit. - Instrument use: guitar, ukulele, mandolin, or banjo nut. - Measures: 1-1/8" x 1-3/8" (29mm x 35mm). -
Sale!
- Gauge: 0.053”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.040”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
– Model: PGHL-2. – Part Number: 609722145633. – Finish: Black. – Measures: Please look at the diagram in the pictures. -
Sale!
Saw to make fret slots on the guitar fretboard, Width: 0.60 mm. -
- Measurement range: 0 - 150mm ( 0 - 6 inches). - Mode: Dual Reading. - Material: Metal. -
Sale!
- Truss Rod Wrench 5/16": Fits Gibson, ESP, and Yamaha - WRE-I516. - Truss Rod Wrench 1/4”: Fits Taylor and Guild - WRE-I14. - Truss Rod Wrench 8mm - Fits Les Paul - WRE-8.0. - Truss Rod Wrench 7mm: Fits Jackson, Ibanez, and PRS - WRE-7.0. -
Sale!
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing humbucker pickups. -
- Length: 550mm. - Width: 40mm. - Thickness: 2mm. -
Sale!
Truss rod box wrench 8 mm for truss rod hex nut -
- Instrument: Electric Guitar. - Finish: Gold. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
– Model: NBS-3. – Length: 63.8mm. – Width: 51.1mm. – Instrument: Electric Guitar. – Finish: Aged Relic. -
- Material: Cork. - Edge: Beveled. - Length: 128mm. - Width: 70mm. - Thickness: 36mm. - Use: Perfect to sand any surface. -
12-inch precision ruler for the construction and repair of musical instruments, made out of long-lasting stainless steel. -
Sale!
- Model: PJCB-4. - Instrument: Electric Guitar. - Jack Cutout Diameter: 0.384 in. - Width: 1.345 in. - Length:1.342 in. -
Truss Rod Nuts slotted shape Length 25mm, with an M5 hole. -
Sale!
DM-50S lever switch, Made in Japan -
- Inner diameter: 94mm. - Thickness: 1.2mm (cut by saw). -
Sale!
Handle for Fender® Guitar Case, Center To Center 4.5 in. -
Sale!
- Radius: 1.5mm, 1.6mm, 1.7mm, and 1.8mm. Size: 50mm diameter x 7mm thick. - Weight: 95g. Material: Steel in Nickel-plated. - Disk design: Palm size, easy to hold, control, and see the filing point. - Concave file with 600 grit diamond. - Made in Japan. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Chrome Plated. - Material: Steel. -
Sale!
- Tuning Machine Conversion Bushings. - Finish: Nickel-plated. - Measures: Please look at the diagram in the pictures. -
Sale!
- Model: 35G1600 - 2W. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included: Screws. - Finish Gold. -
Grits: 150, 400, and 1000. Size: 65 x 18 x 9mm, 2 Fingerboard Guards, a String Spreader. -
Sale!
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Humbucker. - Color: Ivory. - Material: Plastic. -
Sale!
- Model: Tune-o-matic. - Configuration: 6 string. - String spacing: 2-1/16". - Instrument: Electric Guitar. - Finish: Black. -
– Model: SG381 - 07. – Tuner Configuration: 6 in a line. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushing, washers, and screws. – Finish: Black. -
Sale!
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Black. -
Sale!
- Gauge: 0.045”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
Sale!
- Material: Aluminium. - Radius: 16”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
Sale!
- Gauge: 0.032”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan.
