-
Sale!
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Gold. -
– Model: GTC-202. – Finish: Chrome. – Saddles: Steel. – String spacing 10.8mm – Mounting hardware included. – Measures: Please look at the diagram in the pictures. -
- Model: Gotoh® SG381-01 MG-T (Magnum Lock) - Configuration: 3 per side (3L/3R) - Gear Ratio: 16:1 precision tuning - Post Length: 20 mm - Finish & Origin: Chrome plated, Made in Japan. -
Sale!
– Model: SG301 – MG – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
- Serie: original 150. - Model: S-S150M. - Material: Pure Nickel. - Style: Medium. - Gauge: .011, .014, .018, .028, .038, .049. - Use: Electric Guitar. -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut. -
Our vintage cloth push-back wire is 22AWG stranded wire, with textile braid made by Gavitt. This is the same wire used by Fender. -
Braided shield wire just like the kind used on all those fabulous Gibson® guitars.#22 AWG 7/30 tinned soft copper cotton braided push back wire with an overall #34 AWG (2 end) tinned copper braid shield -
Our vintage cloth push-back wire is 22AWG stranded wire, with textile braid made by Gavitt. This is the same wire used by Fender. -
Sale!
- Truss Rod Wrench 5/16": Fits Gibson, ESP, and Yamaha - WRE-I516. - Truss Rod Wrench 1/4”: Fits Taylor and Guild - WRE-I14. - Truss Rod Wrench 8mm - Fits Les Paul - WRE-8.0. - Truss Rod Wrench 7mm: Fits Jackson, Ibanez, and PRS - WRE-7.0. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Grey. -
Humbucker Pickup Model Impact Distortion High output and raw distorted heavy sound while retaining clarity. Extra coil windings produce fat sound while great harmonics can be jumped out of the amp! -
Safe and resistant mat for repair and maintenance work on your guitar, bass, violin, and other string instruments. -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mauve. -
Japanese IKEUTI Carving Knife Right Bevel -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Pink. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Green. -
- Serie: Silver. - Tension: Hard. - Model: SCG HT - Gauge: .0285, .0327, .0410, .030, .036, .044. - Use: Classical Guitar. -
- Mesh:600#; Micron:20μm, Mesh: 1000#; Micron:15μm. - Stone size: 179*60*7.9mm/7”x2.36”x0.31". - Stone Weight: 230g/0.50Lb. -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut. -
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Red. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Sky. -
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
- Grit: 400 - Length: 230mm. - Width: 150mm -
- Size: 0.010. - Total length: 150mm. - Blade length: 115mm. -
– Toothed file length: 87mm (one side only). – Diamond File length: 40mm (one side only). – Nut file size: 95mm x 12mm. – Filing width: 0,016" (0,41 mm). -
High-quality Bastard steel leveling file, glued to a handle of wood, for easier fret leveling job. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lime. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lemon. -
- Model: P365HCD-P. - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Orange. -
Sale!
– Material: 1 Ply PVC. – Color: Ivory. – Length: 450mm / 17 3/4″. – Width: 300mm / 11 13/16”. – Thickness: 2mm. – Use: Building a Pickguard Sheet for Guitar and Bass. -
Sale!
Easy way to make your radius on fretboards. This one to fit Dewalt D26200 -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Pickguard mounting bracket for Les Paul® and similar solid body archtop guitars. -
– Cover dimensions: 69.7 × 38.1 × 16 mm (approx. 2 3/4 × 1 1/2 × 5/8 in) – Opening: 62 × 30.3 mm (2.441 × 1.193 in; approx. 2 7/16 × 1 3/16 in) – Sheet dimensions: 75 × 40 × 0.6 mm (2.953 × 1.575 × 0.024 in; approx. 2 15/16 × 1 9/16 × 3/128 in) – Finish: Silver – Materials: Chrome-plated brass cover and textured aluminum sheet – Weight: Approx. 17.2 g / 0.61 oz -
– Cover dimensions: 69.7 × 38.1 × 16 mm (approx. 2 3/4 × 1 1/2 × 5/8 in) – Opening: 62 × 30.3 mm (2.441 × 1.193 in; approx. 2 7/16 × 1 3/16 in) – Sheet dimensions: 75 × 40 × 0.6 mm (2.953 × 1.575 × 0.024 in; approx. 2 15/16 × 1 9/16 × 3/128 in) – Finish: Anodized gold – Materials: Chrome-plated brass cover and textured aluminum sheet – Weight: Approx. 17.2 g / 0.61 oz -
– Model / SKU: ALU450-20 – Radius: 20 inches – Length: 450 mm / 17.72 inches – Width: 70 mm / 2.76 inches – Thickness: 30 mm / 1.18 inches – Weight: 31 oz – Material: Aluminum – Finish: Silver aluminum -
'- Medium Tension Cuatro strings - Made of Black Nylon - Made in USA -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Tan. -
These saddles use the same manufacturing technique, with a nickel plating applied directly onto the steel body, to provide consistent vintage tone. -
'- Blade Width: 48mm - Plane Body Length: 210mm - Plane Body Width: 60 mm -
Sale!
- Grit: 400. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Back Plate for Stratocaster Style Guitars 10.5mm pitch -
Very handy and practical fret bender. It's a plier with a round groove, where you can insert the tang of your frets and bend them as you like. -
- Grit: 180. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
600 Sanding Wood Sheet 80, 120, 240, 400, 600, 800, 1500, 3000t, usable in both, water and oil. -
Hosco Stereo Jack w/small terminals, Color: Nickel, For Guitar and Guitar Basses -
Humbucker frame with universal holes for multiple configurations. This premium baseplate has a 52mm spacing and is made of raw nickel silver. -
Sale!
- Double Row Humbucker Cover
- These are the same covers preferred by many specialty guitar makers and musicians.
- Brass Gold Plated pickup cover for building or repairing humbucker pickups.
-
Designed to protect the luthier's hands from light-duty applications such as sanding guitar bodies and finishing guitar details. -
Grits: 150, 400, and 1000. Size: 65 x 18 x 9mm, 2 Fingerboard Guards, a String Spreader. -
They're incredibly handy. Use them in sequence as a final step on freshly-crowned frets, to erase fine file marks and scratches, The grits are color-coded for convenience, Grits: 150, 180, 400 and 1000. Size: 65 x 18 x 9mm Fingerboard Guards -
This template is perfect for any guitar shop installing pickups. -
This template is perfect for any guitar shop installing pickups. -
– Complete fretwork tool set, which includes cutter, puller, crowning, and leveling tools.
– Professional-grade tools made from high-durability steel and composites.
– Suitable for fret installation, leveling, crowning, and end dressing. -
Sale!
- Finished necks are done in clear polyurethane
- 21 Small fret wire. Crown: 2.0mm(W) x 1.0mm(H).
-
- Model: PSS-ITB. - Material: Solid Brass. - Instrument: Electric Guitar. - Measures: Please look at the diagram in the pictures. -
Sale!
- Model: GTC-102. - Finish: Black. - Configuration: 6 string. - String spacing: 52.5mm. - Instrument: Electric Guitar. - Measures: Please look at the diagram in the pictures. -
Sale!
- Durable and heavy-duty split leather suede apron in one single piece construction.
- Especially designed for luthiers to keep the dust off of their clothes. Rivet reinforced at stress points and adjustable belt with quick-release plastic buckle and adjustable neck strap.
-
Sale!
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
Stick-on rhythm treble switch plate for electric guitar. -
- Handle: Japanese white oak. - Head: Hexagonal. - Overall Weight: 300 gr. - Overall Length: 332mm. - Head diameter: 26.5mm. -
Sale!
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mustard. -
Sale!
- Serie: Gold (No gold finish). - Tension: Light. - Model: GAG-L - Gauge: .012, .016, .024, .032, .042, .053 - Use: Acoustic Guitar. -
Sale!
- Toothed file length: 87mm (one side only) - Diamond File length: 40mm (one side only) - Nut file size: 95mm x 12mm - Filing width: 0,010" (0,25 mm). -
Sale!
- Grit: 150. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Gotoh string ferrules Fits 8.3mm holes -
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance, Non- inductively wound polyester film/foil construction. Radial lead.10% tolerance, 100v voltage rating. Rated for 85°C operation. -
Sale!
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing humbucker pickups -
- Finish: Black. - Brand: Hosco. - For GE101T, GE102T Tremolos. - Measures: Please look at the diagram in the pictures. -
- Finish: Black. - Brand: Hosco. - Measures: Please look at the diagram in the pictures. - For EV510T, NS510T, 510T, VS100N VG300, VS401, VS401V Tremolos. -
- Finish: Gold. - Brand: Hosco. - For GE101T, GE102T Tremolos. - Measures: Please look at the diagram in the pictures. -
- Finish: Gold. - Brand: Hosco. - Measures: Please look at the diagram in the pictures. - For EV510T, NS510T, 510T, VS100N VG300, VS401, VS401V Tremolos. -
– Model: GTC-101. – Configuration: 6 string. – String spacing: 52.5mm. – Instrument: Electric Guitar. – Finish: Chrome. – Measures: Please look at the diagram in the pictures.
