-
Pickup Selector Switch Cap for Stratocaster. Constructed in resistant plastic. -
Toggle Switch Side with Knob, Black switch tip. -
Output 9 volts / 1000mA. Equipped with a noise reduction circuit. Input voltage 100-240V. -
Good stomp-box effects switch (Double Pole, Double Throw) -
'- Medium Tension Cuatro strings - Made of Black Nylon - Made in USA -
Our vintage cloth push-back wire is 22AWG stranded wire, with textile braid made by Gavitt. This is the same wire used by Fender. -
Sale!
Leather Guitar Strap. Genuine Leather. -
These saddles use the same manufacturing technique, with a nickel plating applied directly onto the steel body, to provide consistent vintage tone. -
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
This template is perfect for any guitar shop installing pickups. -
Humbucker Pickup Model Impact Distortion High output and raw distorted heavy sound while retaining clarity. Extra coil windings produce fat sound while great harmonics can be jumped out of the amp! -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
-
- Serie: original 150. - Model: S-S150M. - Material: Pure Nickel. - Style: Medium. - Gauge: .011, .014, .018, .028, .038, .049. - Use: Electric Guitar. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Tan. -
12-inch precision ruler for the construction and repair of musical instruments, made out of long-lasting stainless steel. -
Professional quality, round-head protractor an ideal tool for luthiers to accurately gauge angles in guitar work: neck joint trajectories, peghead pitches, saddle slot angles, and tool setup. -
WD Music Electrosocket Jackplate For Telecaster -
Potentiometer 250K Logarithmic For audio control -
This template is perfect for any guitar shop installing pickups. -
Designed to protect the luthier's hands from light-duty applications such as sanding guitar bodies and finishing guitar details. -
- Gauge: 0.010", 0.016", 0.024", 0.036", 0.046", 0.056". - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- A set of 26 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
Safe and resistant mat for repair and maintenance work on your guitar, bass, violin, and other string instruments. -
'- Blade Width: 48mm - Plane Body Length: 210mm - Plane Body Width: 60 mm -
- Use: This saw is used to cut sheets to place incrustations in the wood.
- Total length: 365 mm.
- Blade length: 130 mm.
- Handle length: 130 mm.
- Blade thickness: 0.60 mm.
- TPI: 14 teeth per inch.
- Made in Japan.
-
Stomp-box effects switch 3PDT Blue - 9 pins -
Set of 5 jacks with the metal nut. Centre pin 2.1mm -
Japanese IKEUTI Carving Knife Right Bevel -
- Mesh:600#; Micron:20μm, Mesh: 1000#; Micron:15μm. - Stone size: 179*60*7.9mm/7”x2.36”x0.31". - Stone Weight: 230g/0.50Lb. -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mauve. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Pink. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Green. -
- Serie: Silver. - Tension: Hard. - Model: SCG HT - Gauge: .0285, .0327, .0410, .030, .036, .044. - Use: Classical Guitar. -
- Use: The fine teeth of the locking saw allow a precise cut of the curved shapes.
- The long and thin blade makes this a very versatile and practice tool.
- Total length: 337 mm.
- Blade length: 100 mm.
- Handle length: 130 mm.
- Blade thickness: 0.70 mm.
- TPI: 20 teeth per inch.
- Made in Japan.
-
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
- A set of 13 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
2-way sanding block for Ukuleles 12” (305mm) / Flat -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut. -
Back Plate for Stratocaster Style Guitars 10.5mm pitch -
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut. -
2-way sanding block for Ukuleles 16” (406mm) / Flat -
Sale!
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Grey. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Red. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Sky. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lemon. -
- Model: P365HCD-P. - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Orange. -
Set of 3 Two-Way Sanding Block for the sanding frets and leveling fingerboards. -
Stratocaster Candy Apple Red Body. Made in Japan from North American alder. Three-piece center joined. -
Sale!
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Humbucker. - Color: Gold Plated. - Material: Steel. -
Grits: 150, 400, and 1000. Size: 65 x 18 x 9mm, 2 Fingerboard Guards, a String Spreader. -
Set of 12 replacement screws, Genuine vintage specifications -
Potentiometer 250K Linear For tone control. -
– Model: PPTM10. - Long: 150mm. - Height: 60mm. - Width: 25mm. - Made in Portugal. -
- Size: 0.010. - Total length: 150mm. - Blade length: 115mm. -
Sale!
- Grit: 400. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Grit: 180. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Finish: Black. - Brand: Hosco. - Measures: Please look at the diagram in the pictures. - For EV510T, NS510T, 510T, VS100N VG300, VS401, VS401V Tremolos.
