-
Potentiometer 250K Logarithmic For audio control -
Potentiometer 500K Linear For tone control. -
3 Way Pickup Selector Toggle Switch. The switch tip is plastic and replaceable. -
Sale!
- Guitar Tools International Premium Rest Neck.
- Made of cork, to protect the finish of the guitar neck. Compact, solid, sturdy, and lightweight.
- Double height design to use with electric and acoustic guitars. It allows two comfortable height placements, depending on what type of guitar you are working on.
- Once rested on a mat, you don't have to worry about the guitar moving out of position while working, especially when doing more intricate detailing. Since this is made from solid cork block, it is more tolerant of handling, dropping, and typical hammering on the guitar neck...it doesn't break!
- Weight: 11.4 oz. Electric Guitar Height: 3 3/4”. Acoustic Guitar Height: 3 11/16”.
-
5-way switch for Strats or similar guitars. -
- Potentiometer 500K Logarithmic
- For audio control
-
- Brand: GTI. - Finish: Chrome. - Type: Stop Tailpiece (for use with Tune-o-Matic bridges). - Dimensions: 100 mm (L) × 17 mm (W) × 13.3 mm (H). - String Spacing (E–e): 51.4 mm. - Includes: Stop Tailpiece, 2 Mounting Studs & 2 Bushings. -
These are the same covers preferred by many specialty guitar makers and musicians, Brass Chrome Plated pickup cover for building or repairing humbucker pickups. -
Sale!
These are the same covers preferred by many specialty pickup makers. Original PAF-correct covers for humbucker pickups. -
Sale!
These are the same covers preferred by many specialty guitar makers and musicians, Brass chrome plated pickup cover for building or repairing 7-String humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Vintage style spacing for humbucker pickups. -
Sale!
- Humbucker frame with universal holes for multiple configurations. - This premium baseplate has a 50mm spacing. - Made of raw nickel silver. -
Sale!
- Model: SG381-P4N. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 20mm. - Hardware included: bushing, washers, and screws. - Finish Gold. -
- Model: Gotoh® SG381-01 MG-T (Magnum Lock) - Configuration: 3 per side (3L/3R) - Gear Ratio: 16:1 precision tuning - Post Length: 20 mm - Finish & Origin: Chrome plated, Made in Japan. -
- Model: Gotoh SG381-01 MG-T. - Configuration: 3L + 3R (3-per-side) - Locking System: Magnum Lock Trad (MG-T) - Gear Ratio: 16:1 - Finish: Gold | String Post Length: 21.5 mm (Extra Long) | Made in Japan -
This graphite nut will work for most Gibson, or similar style guitars and basses. -
'- Trapezoid Bone Nut Blank - Measures : 53 x 10 x 4,5/6 mm - Material: Bone - Made in Japan -
Important Dimensions - US and metric where applicable Length- 1 11/16 in., 43mmThickness- 5.9mm, .233 in.Height- 5/16 in. high at the highest point with a flat bottom -
- Length = 1 23/32 inches (43.75mm) - Height #1 (fretboard side) = 5/16 inches (7.81mm) - Height #2 (headstock side) = 9/32 inches (7mm) - Thickness at bottom = 15/64 inches (6.1mm) - Thickness at top = 3/16 inches (4.78mm) -
Sale!
- Dimensions: 180 x 5 x 10mm. - Made in Japan. -
Sale!
- Dimensions: 40 x 3.0 x 6mm. - Made in Japan. -
Sale!
- Dimensions: 70x2.5x6mm. - Made in Japan. -
Sale!
- Dimensions: 70 x 3.0 x 6mm. - Made in Japan. -
Sale!
- Dimensions: 40 x 3.5 x 6mm. - Made in Japan. -
Sale!
- Dimensions: 42.5 x 3 x 5.5mm - Made in Japan. -
Sale!
- Dimensions: 45 x 5 x 9mm. - Made in Japan. -
Sale!
- Length: 43mm. - Height: 3.2mm. - Thickness: 7mm. - Brand: Guitar Tools International. - Finish: brass. -
Truss Rod Nuts bullet shape Length 25mm. -
- Width: 41 mm (1-5/8″, R2 size) - Radius: 360 mm (≈14″) - Material: Hardened steel, top-mount design - Finish: Chrome - Made in Japan by Gotoh -
- Finish: Nickel. - Brand: Hosco. - Measures: Please look at the diagram in the pictures. -
For use on 24 spline pots as commonly found on US-made guitars. -
Pickup Selector Switch Cap for Stratocaster. -
One volume and 2 tone replacement knobs for your Strat -
Knob cover type selector Gibson Technical Features: Plastic -
Hosco Metal Knob in Black finish Telecaster Style -
For use on 24 spline pots as commonly found on US-made guitars. -
- 1 Volume Control Knob. - 2 Tone Control Knob. -
For use on 24 spline pots as commonly found on US-made guitars -
For use on 24 spline pots as commonly found on US-made guitars. -
For use on 24 spline pots as commonly found on US-made guitars -
For use on 24 spline pots as commonly found on US-made guitars. -
Material: Steel. Finish: Gold Plated. Curly edge for better grip. -
Knob cover type selector Gibson Technical Features: Plastic -
Knob for tremolo arm 5 mm diameter hole Plastic -
Sale!
Knob cover type selector Gibson Plastic -
Sale!
Knob cover type selector Gibson Technical Features: Plastic -
Sale!
Pickup Selector Switch Cap for Stratocaster. Constructed in resistant plastic. -
Sale!
For use on 24 spline pots as commonly found on US-made guitars. -
P-102B Back Plate for Les Paul style guitars. -
Sale!
- Model: 35G1600 - 1W. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included. - Finish Gold. - Measures: Please look at the diagram in the pictures. -
Hosco Control Plate for Telecaster with screws. -
Relic Series products are limited to specific models and options. -
Back Plate for Stratocaster Style Guitars Black -
P-102I Back Plate for Les Paul style guitars. -
Sale!
Back Plate for Les Paul style guitars. -
Sale!
- Mounting holes: 3. - Thickness: 2.1mm. - Measures: Please look at the diagram in the pictures. -
- Hosco Bass Knob
- With set screw.
- Large
- Black
-
Standard Pick up P Bass Configuration, 3-Ply -
Standard Pick up P Bass Configuration, 3-Ply -
Genuine Fender Jazz Bass pickup cover. -
- Model: GB1.
- Tuner Configuration: 2 Per Side.
- Gear ratio: 20:1.
- Measures: Please look at the diagram in the pictures.
- Finish: Gold. -
- Model: 3D-5. - Support: Reels. - Configuration: 5 Strings. - Surface: Chrome. - Measures: Please look at the diagram in the pictures. - Weight g/item: 278. -
- Underlay/Shim/Spacer for Schaller 3D-5 bass bridge. - Height: 3mm. - Finish: Black. - Made in Germany. -
Nickel Bass Guitar String Bushing Ferrules Set (4), This set of 4 string ferrules are commonly used on string-thru-body basses mounted directly into the back of the instrument body where the strings pass through to the bridge. -
Sale!
- For left-handed bassists. - Configuration: 4 in a line. - Finish: Nickel. - Includes bushings and screws. -
WD Music J-Bass Pickup Cover Square Shape This pickup cover is typically mounted over the top of both the strings and pickup, -
Sale!
"Vintage-style" truss rods are highly effective whether they are configured as a bending rod or simply as a compression rod. -
– Model: P203B-4. – Configuration: 4 Strings. – String Spacing: 19mm. – Saddle Material: Brass. – Instrument: Electric Bass. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
Sale!
- Dimensions: 580mm (Length). 4/16" diameter. - Made in Japan. -
Sale!
"Vintage-style" truss rods are highly effective whether they are configured as a bending rod or simply as a compression rod. -
- Inside diameter: 92mm. - Outside diameter: 112mm. - Thickness: 1.2mm (cut by saw). -
Sale!
- Blade Length: 9” (220mm). - Overall Length: 13 ½”(340mm). - Handle: wooden. - Made in Japan. -
Sale!
– Material: 1-ply PVC. – Color: Black. – Length: 290mm / 11 7/16". – Width: 220mm / 8 5/8”. – Thickness: 1mm. – Use: Building a Pickguard Sheet for Guitar. -
Sale!
- Package dimensions: 4" x 8.25" x 0.75". - Approximate weight: 0.36 lbs. - Sizes: 0.016 / 0.042" - 0.026 / 0.050" - 0.036 / 0.055". -
Sale!
- Gauge: 0.053”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.040”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Length: 385mm. - Length with nut: 401mm. - - Width: 12mm. - Depth: 10.16mm. -
- Inner diameter: 94mm. - Thickness: 1.2mm (cut by saw). -
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade length: 260mm. - Overall Length: 385mm. - Made in Japan. -
- Material: 2-ply PVC (Black). - Size: 300 x 195 mm (11.81" x 7.68"). - Thickness: 0.8 mm (0.03"). - Use: Custom pickguard fabrication for electric guitar. - Origin: Made in Japan. -
Sale!
- Gauge: 0.024”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.026”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.020”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.010”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
This ashtray bridge cover is styled similarly to the cover used on the Fender Jazz Bass. -
High-Quality Switchcraft Jack J11 Input/Output Mono Jack Pack of Six (6) -
- Use: Oire Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Material: These professional-grade chisels are made from high-carbon steel (White # 2 steel) laminated to low-carbon backing steel. - Blade Width: 42 mm. - Length: The overall length is approximately 216 mm (8.5"), Blade length is 60 mm / 2.36”. - Hardness: They harden to more than HRC 65 so they will maintain a sharp edge for much longer than a western equivalent chisel. - Handle: They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Handle: Japanese white oak. - Use: Fretworking. - Overall Weight: 300 gr. - Head Material: Solid Copper. - Overall length: 300mm. -
Sale!
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 3,6,9,12,15,18,21 and 24 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 3 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 15 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 21 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 18 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 9 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 12 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 6 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Shinex Sanding Wood Sheet 240 grit, usable in both, water and oil. -
Sale!
- Gauge: 0.106”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.087”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.032”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.058”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.130”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.028”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.135”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.035”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Shinex Sanding Wood Sheet 800 grit, usable in both, water and oil. -
Sale!
– Instrument: Electric Guitar. – Finish: Black. – Saddle Material: Alloy Steel. – String Spacing: 10.8mm. – Block Height: 41mm. -
- Thickness: 0.57mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
– Model: NBS-3. – Length: 63.8mm. – Width: 51.1mm. – Instrument: Electric Guitar. – Finish: Aged Relic. -
Sale!
- Measures: Please look at the diagram in the pictures. - Finish: Black. -
Sale!
- Model: GTC-202. - Finish: Black. - Saddles: Steel. - String spacing 10.8mm - Mounting hardware included. - Measures: Please look at the diagram in the pictures. -
Sale!
– Model: GTC-201. – Finish: Gold. – Saddles: Brass. – String spacing 10.8mm – Mounting hardware included. – Measures: Please look at the diagram in the pictures. -
- Model: GTC-101. - Configuration: 6 string. - String spacing: 52.5mm. - Instrument: Electric Guitar. - Finish: Gold. - Measures: Please look at the diagram in the pictures. -
- Width: 41 mm (1-5/8″, R2 size) - Radius: 360 mm (≈14″) - Material: Hardened steel, top-mount design - Finish: Black - Made in Japan by Gotoh -
- Model: 510UB - Type: Wraparound bridge / tailpiece - Mounting: Stud Lock-PAT - Series: Gotoh 510 (premium line) - Use: Electric guitars (wraparound style) - Saddle Material : Hard Zinc - Finish Chrome -
Sale!
– Model: 35G1800 – EM. – Tuner Configuration: 3 per side. – Gear ratio: 14:1. – Post Length: 30mm. – Hardware included. – Finish: Gold. -
- Model: SD91 - MG-T - 05M. - Tuner Configuration: 6 in a line. - Gear ratio: 15:1. - Post Length: 20mm. - Hardware included: bushings, washers, and screws. - Finish: Nickel. -
Sale!
- Model: SD91 MGT - 05M. - Tuner Configuration: 6 in line. - Gear ratio: 15:1. - Post Length: 20mm. - Hardware included: bushings, washers, and screws. - Finish: Gold. -
- Model: SG381 - MG - 07.
- Tuner Configuration: 6 in a line.
- Gear ratio: 16:1.
- Post Length: 20mm.
- Hardware included: bushings, washers, and screws.
- Finish: Black. -
Sale!
- Model: SG381 - 07. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushings, washers and screws. - Finish: Chrome. -
- Model: SG381 - 01. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushing, washers, and screws. - Finish: Black. -
Sale!
- Gauge: 0.085”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Radius: Medium. - Series: 5002. - Cutting Width: 2.68mm (0.105") -
Sale!
- Gauge: 0.095”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan.
