-
Sale!
- Model: FB30. - Gear ratio: 1:20. - Post Length: 31.2mm. - Hardware included: bushing, washers, and screws. - Finish Aged Nickel. - Measures: Please look at the diagram in the pictures. -
Sale!
– Model: GTC-202. – Finish: Chrome. – Saddles: Steel. – String spacing 10.8mm – Mounting hardware included. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: SG381 - 01. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushing, washers, and screws. - Finish: Black. -
– Set of 2 rubber sanding blocks for finish repair.
– Includes Flat (33mm x 27mm) and Oval (33mm x 26mm) blocks.
– Compatible with Kovax Finish Repairing Papers.
– Precision-molded for surface leveling and control.
– Made in Japan with professional-grade materials. -
- 1 roll, width 6mm X 18 meters long (20 yards). - 1 roll, width 12mm X 18 meters long (20 yards). - 1 roll, width 20mm X 18 meters long (20 yards). - Thickness: 0.1mm. - Adhesion: 1.08N/10mm. - Tensile strength: 68.1N/15mm. -
- Model: GP-LBCP41. - Finish: Chrome. - Weight: g/item: 5.2gr. - Dimensions: Please look at the diagram in the pictures. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing 7-string humbucker pickups. -
Sale!
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
Sale!
- Guitar Tools International Premium Rest Neck.
- Made of cork, to protect the finish of the guitar neck. Compact, solid, sturdy, and lightweight.
- Double height design to use with electric and acoustic guitars. It allows two comfortable height placements, depending on what type of guitar you are working on.
- Once rested on a mat, you don't have to worry about the guitar moving out of position while working, especially when doing more intricate detailing. Since this is made from solid cork block, it is more tolerant of handling, dropping, and typical hammering on the guitar neck...it doesn't break!
- Weight: 11.4 oz. Electric Guitar Height: 3 3/4”. Acoustic Guitar Height: 3 11/16”.
-
Sale!
- Model: SG381 - 07. - Tuner Configuration: 6 in a line. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
- Model: SG381 - 01. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushings, washers, and screws. - Finish: Gold. -
Sale!
High-Quality Switchcraft Jack J11 Input/Output Mono Jack Pack of Six (6) -
Sale!
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade Length: 255mm. - Overall Length: 385mm. - Made in Japan. -
Sale!
- Head: 11mmx9mm dia. - Length: 78mm. - Weight: 4g. -
Sale!
- Truss Rod Wrench 5/16": Fits Gibson, ESP, and Yamaha - WRE-I516. - Truss Rod Wrench 1/4”: Fits Taylor and Guild - WRE-I14. - Truss Rod Wrench 8mm - Fits Les Paul - WRE-8.0. - Truss Rod Wrench 7mm: Fits Jackson, Ibanez, and PRS - WRE-7.0. -
Sale!
- File edges: Curved. - Product use: bone, plastic, and tusq nuts. Not suitable for metal nuts. - Double edge. - Total length: 150mm. - Cutting length: 115mm. -
Sale!
- Model: PSS-ITB. - Material: Solid Brass. - Instrument: Electric Guitar. - Measures: Please look at the diagram in the pictures. -
Sale!
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Sale!
- Model: 404BO-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Brass. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. - Plate Material: Hard Zinc. -
1 Switchcraft 3-way toggle switch. 1 Switchcraft output jack. 4 Pots 500K Long Shaft CTS Brand. 2 Orange Drop, 100V Poliéster of .022uf. WD Copper Shielding Foil 8" X 12". 60" Braided-shield push-back guitar circuit wire 22AWG inner conductor, 12" Non-shielded push-back guitar circuit wire 22AWG white. 24" Non-shielded push-back guitar circuit wire 22AWG black. -
Sale!
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance, Non- inductively wound polyester film/foil construction. Radial lead.10% tolerance, 100v voltage rating. Rated for 85°C operation. -
Sale!
- Finished necks are done in clear polyurethane
- 21 Small fret wire. Crown: 2.0mm(W) x 1.0mm(H).
-
Hosco Stereo Jack w/small terminals, Color: Nickel, For Guitar and Guitar Basses -
Sale!
Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing, Mono 2-Conductor. -
Toggle Switch Side with Knob, Black switch tip. -
Output 9 volts / 1000mA. Equipped with a noise reduction circuit. Input voltage 100-240V. -
WD Music J-Bass Pickup Cover Square Shape This pickup cover is typically mounted over the top of both the strings and pickup, -
Sale!
– Model: 510UB. – Mounting Hole Center to Center: 82mm. – Instrument: Electric Guitar. – String Spacing: 10.8mm. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: GTC-102. - Finish: Chrome. - Configuration: 6 string. - String spacing: 52.5mm. - Instrument: Electric Guitar. - Measures: Please look at the diagram in the pictures. -
– Model: GTC-101. – Configuration: 6 string. – String spacing: 52.5mm. – Instrument: Electric Guitar. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
– Model: P203B-4. – Configuration: 4 Strings. – String Spacing: 19mm. – Saddle Material: Brass. – Instrument: Electric Bass. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
- Model: GTC-12. - Finish: Chrome. - Saddles: Hard Zinc. - String spacing: 10.5mm - Measures: Please look at the diagram in the pictures. -
Sale!
- Model: 3D-4. - Support: Reels. - Surface: Gold. - Measures: Please look at the diagram in the pictures. - Weight g/item: 267. -
Sale!
- Model: Sd91 - 05m. - Tuner Configuration: 6 in Líne. - Gear ratio: 15:1. - Post Length: 24.6mm. - Hardware included: bushings, washers, and screws. - Finish: Relic. -
Sale!
Wilkinson Hot-ver Pickup P-90 Style, Rear pickup is reverse wound/reverse polarity. -
Sale!
Wilkinson Alnico V telecaster pickup, Great combination for classical electric sound. -
Sale!
- Grit: 150. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
– Material: 3-ply PVC. – Length: 490mm. – Width: 290mm. – Thickness: 2.2mm. -
Sale!
Saw to make fret slots on the guitar fretboard, Width: 0.60 mm. -
Sale!
Japanese Fret Slot Cleaning saw, Hosco Brand - Made in Japan. -
Nickel Bass Guitar String Bushing Ferrules Set (4), This set of 4 string ferrules are commonly used on string-thru-body basses mounted directly into the back of the instrument body where the strings pass through to the bridge. -
Sale!
- Truss rod box wrench 1/4" for truss rod hex nut. -
This is a real bone nut blank sized for vintage Fender® instruments. It has an equal radius on the top and bottom. Enhance your tone and increase your instruments sustain while adding a more durable and longer-lasting material to one of the most important contact points on your instrument. Please note this part comes without string slots and requires professional installation and modification using proper tools. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
'- Trapezoid Bone Nut Blank - Measures : 53 x 10 x 4,5/6 mm - Material: Bone - Made in Japan
