-
- Length: 26.67mm. - Height: 12.46mm. - Thickness: 9.65mm. - Brand: Guitar Tools International. - Finish: brass. -
– Model: SD90-MG-T-SL
– Tuner Configuration: 3 per side.
– Gear ratio: 15:1.
– Post Length: 21.5mm. Not Staggered. They are suitable for Gibson Guitars and similar instruments with wide head necks.
– Hardware included: bushings, washers, and screws.
– Finish: Nickel. -
Sale!
- TBP1: Bridge Stud hole diameter = 5/8 in. Bridge Stud hole spacing = 3 in. ctr to ctr Material = Steel.- BSS1: Center to Center Stud Spacing= 3 in. E to E String Spacing= 56mm String Pitch(adjustable)= 11.2 mm Body Insert Hole Diameter= 27/64 in. Metric Threaded Studs. -
- Model: PSS-ITB. - Material: Solid Brass. - Instrument: Electric Guitar. - Measures: Please look at the diagram in the pictures. -
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
- Model: 404BO-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Brass. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. - Plate Material: Hard Zinc. -
- Gauge Sizes: 0.010″, 0.013″, 0.017″, 0.024″, 0.032″, 0.036″, 0.046″, 0.056″. - Material: Hardened Stainless Steel. - Cutting Length: 115mm (4 1/2”). Rounded edges. - Total Length: 150mm. - Width: 12mm. - Made in Japan by Hiroshima Yasuri. -
- Material: Aluminium. - Radius: 7.25”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
- CTS potentiometers: 500K long shaft configuration
- Capacitors: Orange Drop polyester .022µF / 100V (2 units)
- Copper shielding foil dimensions: 8" x 12”
- Braided-shield wire: 22AWG inner conductor, 60” length -
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance, Non- inductively wound polyester film/foil construction. Radial lead.10% tolerance, 100v voltage rating. Rated for 85°C operation. -
Sale!
- Finished necks are done in clear polyurethane
- 21 Small fret wire. Crown: 2.0mm(W) x 1.0mm(H).
-
Hosco Stereo Jack w/small terminals, Color: Nickel, For Guitar and Guitar Basses -
Sale!
Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing, Mono 2-Conductor. -
Output 9 volts / 1000mA. Equipped with a noise reduction circuit. Input voltage 100-240V. -
WD Music J-Bass Pickup Cover Square Shape This pickup cover is typically mounted over the top of both the strings and pickup, -
– Model: GTC-101. – Configuration: 6 string. – String spacing: 52.5mm. – Instrument: Electric Guitar. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
– Model: P203B-4. – Configuration: 4 Strings. – String Spacing: 19mm. – Saddle Material: Brass. – Instrument: Electric Bass. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: 3D-4. - Support: Reels. - Surface: Gold. - Measures: Please look at the diagram in the pictures. - Weight g/item: 267. -
Sale!
Wilkinson Alnico V telecaster pickup, Great combination for classical electric sound. -
Sale!
- Grit: 150. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Blade length with rib: 120mm. - Width: 0.60mm. -
Sale!
Japanese Fret Slot Cleaning saw, Hosco Brand - Made in Japan. -
Nickel Bass Guitar String Bushing Ferrules Set (4), This set of 4 string ferrules are commonly used on string-thru-body basses mounted directly into the back of the instrument body where the strings pass through to the bridge. -
- Flat-head design for clean fret removal with minimal damage.
- Precision-ground steel jaws for accurate grip under fret wire.
- Ergonomic non-slip handle for control and comfort.
- Made in Japan by Hosco – professional luthier-grade tool. - Note: Not intended for cutting wire – designed for pulling only. -
Sale!
- Truss rod box wrench 1/4" for truss rod hex nut. -
This is a real bone nut blank sized for vintage Fender® instruments. It has an equal radius on the top and bottom. Enhance your tone and increase your instruments sustain while adding a more durable and longer-lasting material to one of the most important contact points on your instrument. Please note this part comes without string slots and requires professional installation and modification using proper tools. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
'- Trapezoid Bone Nut Blank - Measures : 53 x 10 x 4,5/6 mm - Material: Bone - Made in Japan -
Hosco Control Plate for Telecaster with screws. -
Sale!
Truss Rod Washer for Gibson Guitar -
WD Music Electrosocket Jackplate For Telecaster -
- BG kit Discovery for Clarinet DKC.
- Includes:
- 1 piece - A65 U - Pad Dryer.
- 3 pieces - A80 S - Reed Savers.
- 2 pieces - A10 S - Mouthpiece Cushions.
-
Sale!
BG strap for Tenor/Baritone saxophone comfort. Fast and secure adjustment. -
Back Plate for Stratocaster Style Guitars Black -
For use on 24 spline pots as commonly found on US-made guitars. -
For use on 24 spline pots as commonly found on US-made guitars -
Sale!
Knob cover type selector Gibson Plastic -
- Pickguard Style – Les Paul - Humbucker Cutout – 46 mm (1.8”) - Pickup Spacing – 57 mm (2.25”) - Thickness – 2 mm (0.08”) - Material – PVC (3-ply Black/White/Black) -
Pickup Selector Switch Cap for Stratocaster. -
- Material: Aluminium. - Radius: 7.25", 9.5", 10" 12", and 16". - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Putting a radius on a fingerboard or leveling frets. -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Sale!
- Model: SD90 - SL. - Tuner Configuration: 3 per side. - Gear ratio: 15:1. - Post Length: 19.5mm. - Hardware included: bushings, washers, and screws. - Finish: Relic. -
- Handle: Japanese white oak. - Head: Hexagonal. - Overall Weight: 300 gr. - Overall Length: 332mm. - Head diameter: 26.5mm.
