-
Sale!
- Gauge: 0.053”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.028”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.130”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.058”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.032”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Brand: Hosco. - Type: H-FTN-M - Suitable for: Medium Frets. - Easily cuts through any material of fret wire. - Fret pliers hold fret wire in place. - Easy to use. -
– Complete fretwork tool set, which includes cutter, puller, crowning, and leveling tools.
– Professional-grade tools made from high-durability steel and composites.
– Suitable for fret installation, leveling, crowning, and end dressing. -
Sale!
600 Sanding Wood Sheet 80, 120, 240, 400, 600, 800, 1500, 3000t, usable in both, water and oil. -
- Dual scale: inches (1/64”) and millimeters (0.25 mm) for precise measurements. - Laser-etched markings for durability and long-term accuracy. - Made from stainless steel, which is resistant to bending and corrosion. - Suitable for electric, acoustic, and bass guitars. -
Very handy and practical fret bender. It's a plier with a round groove, where you can insert the tang of your frets and bend them as you like. -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Sale!
Easy way to make your radius on fretboards. This one to fit Dewalt D26200 -
- Blade Length: Approximately 10 inches (250mm), providing ample cutting surface for efficient material removal. - Blade Width: 1.3 inches (33mm) at its widest point, ensuring stability and control during use. - Material: High-carbon steel with multi-directional cutting teeth for enhanced durability and precision. -
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 12 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
- Material: Aluminium. - Radius: 7.25", 9.5", 10" 12", and 16". - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Putting a radius on a fingerboard or leveling frets. -
High-quality Bastard steel leveling file, glued to a handle of wood, for easier fret leveling job.
-
– Toothed file length: 87mm (one side only). – Diamond File length: 40mm (one side only). – Nut file size: 95mm x 12mm. – Filing width: 0,016" (0,41 mm). -
– Toothed file length: 87mm (one side only). – Diamond File length: 40mm (one side only). – Nut file size: 95mm x 12mm. – Filing width: 0,013" (0,33 mm). -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Sale!
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 3,6,9,12,15,18,21 and 24 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Good for repairing the finishing, This product is used to obtain a fine finish when repairing guitar bodies and necks, Grits #2500. -
Kovax Finish Repairing Papers 1200grit, orange -
Shinex Sanding Wood Sheet 240 grit, usable in both, water and oil. -
- Gauge: 0.087”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
-
Shinex Sanding Wood Sheet 120 grit, usable in both, water and oil. -
- Grit: 400 - Length: 230mm. - Width: 150mm -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
Sale!
- Blade Length: 180mm/7.1 inches. - Teeth Pitch: 1.0mm TPI: 25.4. - Cutting Width: 0.46 mm. - Blade Thickness: 0.3mm. -
Sale!
- Gauge: 0.106”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
Sale!
- Thickness: 0.50mm. - Tooth spacing: 0.9mm. - Blade length: 15mm. - Total length: 160mm. - Angle Fret saw: 45º. -
Sale!
- Material: Cork. - Edge: Beveled. - Length: 110mm. - Width: 56mm. - Thickness: 30mm. - Use: Perfect to sand any surface. -
- Grit: 180. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
- Grit: 400. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Size: 0.010. - Total length: 150mm. - Blade length: 115mm. -
Sale!
- Handle: Japanese white oak. - Use: Fretworking. - Overall Weight: 300 gr. - Head Material: Solid Copper. - Overall length: 300mm. -
– Model: PPTM10. - Long: 150mm. - Height: 60mm. - Width: 25mm. - Made in Portugal.
