-
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
- Made of cork and TPE* , high-performance, textured, anti-slip surface to improve traction.
- Thickness: 4.5mm
- Size: 120 cm x 47in / 50 cm x 19.5inch
- Durable yet soft to help avoid scratching your instrument.
- For repair and maintenance on your guitar, bass, banjo, mandolin, ukulele, violin, and other string instruments.
- *TPEs are a family of rubber like materials that combine the characteristics of rubber with the recyclability and processing advantages of plastics.
-
- Flat-head design for clean fret removal with minimal damage.
- Precision-ground steel jaws for accurate grip under fret wire.
- Ergonomic non-slip handle for control and comfort.
- Made in Japan by Hosco – professional luthier-grade tool. - Note: Not intended for cutting wire – designed for pulling only. -
Sale!
- 10mm: for mini potentiometers/blend pots / Gotoh SG series. - 11mm: for potentiometers / push-pull control pots. - 1/2": for CTS potentiometers. - 16mm: for the knurled nut of Japanese toggle switches. - Multi: for the knurled nut of U.S.-made toggle switches or others. - 1 1/18" (30mm) square. -
Sale!
- Size: Medium. - Dimensions: 3.95 x 0,82 x 017 inch. - Crowning surface: 3.60” (91.5mm) * 0.08” (2.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- Truss rod box wrench 1/4" for truss rod hex nut. -
Sale!
- Material: Hardened Stainless Steel, Satin Chrome Finish - Length: 150 mm / 6 in - Scale: Metric (mm / 0.5 mm) + Imperial (1/32" / 1/64") - Marking: Photo-Etched, Black Filled Graduations - Origin: Made in Japan (Shinwa) -
- Thickness: 0.57mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
-
Sale!
- Blade Thickness: 0.40 mm (0.0157 in) - Overall Length: 152.4 mm (6 in) - Body Width: 32.5 mm (1.28 in) - Material: Hardened steel blade - Origin: Made in Japan -
Sale!
- Length: 65mm. - Width: 18mm. - Thickness: 9mm. - 1000 grit. -
Sale!
Truss rod box wrench 8 mm for truss rod hex nut -
Shinex Sanding Wood Sheet 120 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 3000 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 1500 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 80 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 800 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 240 grit, usable in both, water and oil. -
This kit includes the following products:- Guitar Neck Rest: Made of cork, to protect the finish of the guitar neck. Compact, solid, sturdy and lightweight. Weight: 11.4 oz. Electric Guitar Height: 3 3/4”. Acoustic Guitar Height: 3 11/16”.
- Guitar and Bass Mat: Made of cork and TPE , high-performance, textured, anti-slip surface to improve traction. Thickness: 4.5mm. Size: 120 cm x 47in / 50 cm x 19.5inch
-
Sale!
- Blade Length: Approximately 10 inches (250mm), providing ample cutting surface for efficient material removal. - Blade Width: 1.3 inches (33mm) at its widest point, ensuring stability and control during use. - Material: High-carbon steel with multi-directional cutting teeth for enhanced durability and precision. -
- Long: 230mm. - Width: 35mm. - Thickness: 3mm. -
Sale!
- Truss rod box wrench 7 mm for truss rod hex nut -
– Model: PPTM10. - Long: 150mm. - Height: 60mm. - Width: 25mm. - Made in Portugal. -
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
12-inch precision ruler for the construction and repair of musical instruments, made out of long-lasting stainless steel. -
Professional quality, round-head protractor an ideal tool for luthiers to accurately gauge angles in guitar work: neck joint trajectories, peghead pitches, saddle slot angles, and tool setup. -
- A set of 26 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
- A set of 13 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
- Dual scale: inches (1/64”) and millimeters (0.25 mm) for precise measurements. - Laser-etched markings for durability and long-term accuracy. - Made from stainless steel, which is resistant to bending and corrosion. - Suitable for electric, acoustic, and bass guitars. -
- Model: JTK-1 – Japanese Starter Toolkit - Includes: Kakuri Plane 48mm, Tataki Nomi Chisel 3mm, GTI Cork Sanding Block, TG6520 Sharpening Stone, Gyokucho Ryoba Saw, Ryuzo Hammer - Sharpening Stone: Double-Sided Ceramic – 2000 / 5000 Grit - Applications: Guitar Building, Repair, Setup, Fretwork, Woodworking & General Lutherie - Origin: Premium Japanese Tools & GTI Workshop Accessories -
Sale!
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
- Measurement range: 0 - 150mm ( 0 - 6 inches). - Mode: Dual Reading. - Material: Metal. -
- Use: The fine teeth of the locking saw allow a precise cut of the curved shapes.
- The long and thin blade makes this a very versatile and practice tool.
- Total length: 337 mm.
- Blade length: 100 mm.
- Handle length: 130 mm.
- Blade thickness: 0.70 mm.
- TPI: 20 teeth per inch.
- Made in Japan.
-
- Use: This saw is used to cut sheets to place incrustations in the wood.
- Total length: 365 mm.
- Blade length: 130 mm.
- Handle length: 130 mm.
- Blade thickness: 0.60 mm.
- TPI: 14 teeth per inch.
- Made in Japan.
-
Sale!
- Thickness: 0.50mm. - Tooth spacing: 0.9mm. - Blade length: 15mm. - Total length: 160mm. - Angle Fret saw: 45º. -
Sale!
- Blade Length: 180mm/7.1 inches. - Teeth Pitch: 1.0mm TPI: 25.4. - Cutting Width: 0.46 mm. - Blade Thickness: 0.3mm. -
Sale!
- Blade Length: 180mm/7.1 inches. - Teeth Pitch: 1.5mm. - Cutting Width: 0.52 mm. - Blade Thickness: 0.3mm. -
Sale!
- Blade length: 7-inch. - Length: 15-inch. - Teeth per inch: Crosscut 19TPI. - Rip 9TPI. -
Sale!
Japanese Fret Slot Cleaning saw, Hosco Brand - Made in Japan. -
Sale!
- Thickness: 0.53mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel.
