-
Sale!
Saw to make fret slots on the guitar fretboard, Width: 0.60 mm. -
- Precision Japanese fret slotting saw set (4 pcs) for professional luthier work - Blade widths: 0.50 mm / 0.53 mm / 0.57 mm / 0.60 mm for multiple fret tang sizes - 120 mm reinforced steel blades with stabilizing rib for straight, accurate cuts - High-quality Japanese manufacturing for durability and long-lasting sharpness - Uniform ergonomic wooden handles with consistent balance and professional finish -
Sale!
- Thickness: 0.50mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
Sale!
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
- 1 roll, width 6mm X 18 meters long (20 yards). - 1 roll, width 12mm X 18 meters long (20 yards). - 1 roll, width 20mm X 18 meters long (20 yards). - Thickness: 0.1mm. - Adhesion: 1.08N/10mm. - Tensile strength: 68.1N/15mm. -
Sale!
- Guitar Tools International Premium Rest Neck.
- Made of cork, to protect the finish of the guitar neck. Compact, solid, sturdy, and lightweight.
- Double height design to use with electric and acoustic guitars. It allows two comfortable height placements, depending on what type of guitar you are working on.
- Once rested on a mat, you don't have to worry about the guitar moving out of position while working, especially when doing more intricate detailing. Since this is made from solid cork block, it is more tolerant of handling, dropping, and typical hammering on the guitar neck...it doesn't break!
- Weight: 11.4 oz. Electric Guitar Height: 3 3/4”. Acoustic Guitar Height: 3 11/16”.
-
- Model: TL-FL160SHC- Length: 160 mm- Width: 28 mm- Thickness: 5 mm- Surface: Hard Chrome (HC) coated -
Sale!
- Length: 65mm. - Width: 18mm. - Thickness: 9mm. - 1000 grit. -
Sale!
- Grit: 150. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
- Thickness: 0.57mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
Sale!
- Radius: 1.5mm, 1.6mm, 1.7mm, and 1.8mm. Size: 50mm diameter x 7mm thick. - Weight: 95g. Material: Steel in Nickel-plated. - Disk design: Palm size, easy to hold, control, and see the filing point. - Concave file with 600 grit diamond. - Made in Japan. -
Sale!
Japanese Fret Slot Cleaning saw, Hosco Brand - Made in Japan. -
Sale!
- Size: Jumbo. - Dimensions: 3.95 x 0.82 x 0.17 inch. - Crowning surface: 3.60” (91.5mm) * 0.12” (3.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- Size: 90 x 31 x 15 mm (without screw). - Weight: 85 g. - Material: High-quality Aluminum. -
Sale!
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
– Complete fretwork tool set, which includes cutter, puller, crowning, and leveling tools.
– Professional-grade tools made from high-durability steel and composites.
– Suitable for fret installation, leveling, crowning, and end dressing. -
Very handy and practical fret bender. It's a plier with a round groove, where you can insert the tang of your frets and bend them as you like. -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
High-quality Bastard steel leveling file, glued to a handle of wood, for easier fret leveling job.
-
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
Sale!
- Thickness: 0.50mm. - Tooth spacing: 0.9mm. - Blade length: 15mm. - Total length: 160mm. - Angle Fret saw: 45º. -
- Grit: 180. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
- Grit: 400. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
– Model: PPTM10. - Long: 150mm. - Height: 60mm. - Width: 25mm. - Made in Portugal. -
Grits: 150, 400, and 1000. Size: 65 x 18 x 9mm, 2 Fingerboard Guards, a String Spreader. -
Set of 3 Two-Way Sanding Block for the sanding frets and leveling fingerboards. -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge
