-
- Brand: Musedo. Model: CP-63 - Type: Clip-On Contact Pickup - Pickup Design: Piezo Contact Pickup - Output Connector: 1/4" (6.35mm) Mono Plug. - Cable Length: Approx. 2.5m (8.2 ft.) - Maximum Clip Opening: Approx. 25mm - Power Requirement: None -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing 7-string humbucker pickups. -
- Closed Humbucker Cover
- These are the same covers preferred by many specialty guitar makers and musicians.
- Black plated pickup cover for building or repairing humbucker pickups.
-
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing lipstick pickups. -
Sale!
These are the same covers preferred by many specialty guitar makers and musicians, Nickel Silver Raw pickup cover for building or repairing 7-String humbucker pickups. These premium humbucker covers are made of nickel silver raw. -
Sale!
- Humbucker Cover - 50mm
- These are the same covers preferred by many specialty guitar makers and musicians.
- Original PAF-correct covers for humbucker pickups.
-
Sale!
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Vintage style spacing for humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass Chrome Plated pickup cover for building or repairing Filtertron style humbucking pickups. -
Sale!
These are the same covers preferred by many specialty pickup makers, Brass Gold Plated pickup cover for building or repairing Filtertron style humbucking pickups. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing 7-string humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing 7-string humbucker pickups. -
Sale!
- Model: Sd91 - 05m. - Tuner Configuration: 6 in Líne. - Gear ratio: 15:1. - Post Length: 24.6mm. - Hardware included: bushings, washers, and screws. - Finish: Relic. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing humbucker pickups. -
- Material: Zinc block, stamped steel saddles. - Finish: Chrome (body), Nickel (saddles). - String Spacing: 52.5mm. - Made in: Korea. -
- Replacement pickguard for Jazz Bass
- 3-Ply
-
- Material: 2-ply PVC (Black). - Size: 300 x 195 mm (11.81" x 7.68"). - Thickness: 1.6 mm (0.063"). - Use: Custom pickguard fabrication for electric guitar. - Origin: Made in Japan. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Chrome Plated. - Material: Steel. -
Sale!
- Model: Tune-o-matic. - Configuration: 6 string. - String spacing: 2-1/16". - Instrument: Electric Guitar. - Finish: Black. -
Sale!
- Model: SG381 - MG - 07.
- Tuner Configuration: 6 in a line.
- Gear ratio: 16:1.
- Post Length: 20mm.
- Hardware included: bushings, washers, and screws.
- Finish: Chrome. -
- Series: Original Kalamazoo Line. - Manufacturing Method: Cast. - Manufacturing Material: Aluminum. - Overall Length: 4.75"/120.65mm. - Overall Width: 3.7"/93.98mm. - V5 Adapter: Mounting Kit. -
- CTS potentiometers: 500K audio taper configuration - Capacitors: Orange Drop polyester .022µF / 100V (2 units) - Copper shielding foil dimensions: 8" x 12” - Braided-shield wire: 22AWG inner conductor, 60” length - Push-back hookup wires: 22AWG white 12" and black 24” lengths -
- CTS potentiometers: 500K long shaft configuration
- Capacitors: Orange Drop polyester .022µF / 100V (2 units)
- Copper shielding foil dimensions: 8" x 12”
- Braided-shield wire: 22AWG inner conductor, 60” length -
- Designed for Gibson SG style electric guitar wiring configurations. - CTS 500K potentiometers for humbucker pickup applications. - Includes Hosco Made in Japan right-angle 3-way toggle switch. - Orange Drop .022µF 100V polyester capacitors included. - Cloth push-back wiring and copper shielding foil for low-noise installation. -
600 Sanding Wood Sheet 600 grit, usable in both, water and oil. -
– Model: SG381 - 01. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
- Blade length with rib: 120mm. - Width: 0.60mm. -
- Total length (closed): 8 1/4" (210mm).- Jaw width: 19/32" (16mm).- T-shaped safety lock system with center cutout.- High-carbon steel cutting edges, optimized for stainless steel frets. -
- Model: Jumbo. - Size: 7cm (2-3/4” ) long. - Radius: 12-inch radius (300 mm). - Hardness: HV175. - Measures: Please look at the diagram in the pictures. -
- Length: 83mm. - Width: 33mm. - Height: 0.1mm. - Scale Length: approx. 600 - 900mm. - Made in Japan. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Sale!
- TBP1: Bridge Stud hole diameter = 5/8 in. Bridge Stud hole spacing = 3 in. ctr to ctr Material = Steel.- BSS1: Center to Center Stud Spacing= 3 in. E to E String Spacing= 56mm String Pitch(adjustable)= 11.2 mm Body Insert Hole Diameter= 27/64 in. Metric Threaded Studs. -
- Integrated grounding hole allows secure connection of the guitar or bass circuit ground wire for reliable electrical continuity- - CNC machined solid brass construction for increased mass and improved resonance - Overall dimensions: 45 mm (1 3/4") width × 22 mm (7/8") height × 2.5 mm (3/32") thickness - Multi-point spring anchor design for balanced tension distribution - Precision-drilled mounting holes for standard tremolo cavity compatibility - Includes mounting screws, set screw, and Allen key for installation -
Sale!
This Is Bigsby®'s B50 licensed die-cast version of their famous B5 bridge. Commonly used on solid body guitars. -
Sale!
- Model: B50. - Finish: Aluminum. - Measures: Please look at the diagram in the pictures. - Part Number: 609722127639. -
- Size: #6 - Head Diameter 0.26 in - Material: Solid Brass - Head Type: Oval Head - Drive Type: Phillips - Application: Wood / Guitar Hardware / General Use -
- Material: Precision-machined brass (high-density alloy)
- Process: CNC machined for consistent geometry and accuracy
- Bottom Radius: 9.5" (≈ 241.3 mm) for exact fingerboard matching
- Top Surface: Fully flat for stable press contact
- Dimensions: 63.5 × 13.9 × 3 mm (2.5" × 0.55" × 0.12")
- Surface Finish: Fine-machined (Ra 3.2 μm) for smooth, even pressure distribution
