26.12$Original price was: 26.12$.24.99$Current price is: 24.99$.
- Material: High Carbon Steel.
- Key Feature: Double-sided, Fine (25 teeth per inch), and an extra-fine side(45 teeth per inch approx).
- Detachable rubber grip handle.
- Blade length: 220mm.
- Overall Length: 340mm.
- Made in Japan.
- Material: High Carbon Steel.
- Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch).
- Detachable rubber grip handle.
- Blade length: 283mm.
- Overall Length: 390mm.
- Made in Japan.
21.99$Original price was: 21.99$.19.99$Current price is: 19.99$.
- Blade Length: Approximately 10 inches (250mm), providing ample cutting surface for efficient material removal.
- Blade Width: 1.3 inches (33mm) at its widest point, ensuring stability and control during use.
- Material: High-carbon steel with multi-directional cutting teeth for enhanced durability and precision.
- Material: High Carbon Steel.
- Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch).
- Detachable rubber grip handle.
- Blade Length: 255mm.
- Overall Length: 385mm.
- Made in Japan.
- Material: High Carbon Steel.
- Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch).
- Detachable rubber grip handle.
- Blade length: 260mm.
- Overall Length: 385mm.
- Made in Japan.
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
5.49$Original price was: 5.49$.4.99$Current price is: 4.99$.
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily.
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily.
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily.
21.99$Original price was: 21.99$.19.99$Current price is: 19.99$.
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry.
- Blade Width: 12 mm.
- Length: The overall length is approximately 225 mm.
- Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel.
- They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
21.99$Original price was: 21.99$.17.99$Current price is: 17.99$.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry.
- Blade Width: 15 mm.
- Length: The overall length is approximately 225 mm.
- Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel.
- They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
24.19$Original price was: 24.19$.19.99$Current price is: 19.99$.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry.
- Blade Width: 18 mm.
- Length: The overall length is approximately 225 mm.
- Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel.
- They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
21.99$Original price was: 21.99$.19.99$Current price is: 19.99$.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry.
- Blade Width: 21 mm.
- Length: The overall length is approximately 225 mm.
- Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel.
- They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry.
- Blade Width: 3 mm.
- Length: The overall length is approximately 225 mm.
- Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel.
- They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
- Blade Length: 9” (220mm). - Overall Length: 13 ½”(340mm). - Handle: wooden. - Made in Japan.
- Material: High Carbon Steel. - Key Feature: Double-sided, Fine (25 teeth per inch), and an extra-fine side(45 teeth per inch approx). - Detachable rubber grip handle. - Blade length: 220mm. - Overall Length: 340mm. - Made in Japan.
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade length: 283mm. - Overall Length: 390mm. - Made in Japan.
- Blade Length: Approximately 10 inches (250mm), providing ample cutting surface for efficient material removal. - Blade Width: 1.3 inches (33mm) at its widest point, ensuring stability and control during use. - Material: High-carbon steel with multi-directional cutting teeth for enhanced durability and precision.
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade Length: 255mm. - Overall Length: 385mm. - Made in Japan.
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade length: 260mm. - Overall Length: 385mm. - Made in Japan.
Potentiometer 250K Logarithmic For audio control
Potentiometer 250K Linear For tone control.
Potentiometer 500K Linear For tone control.
Cover your pickup with aluminum for better aesthetics.
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork.
- These truss rod covers are used on Gibson's iconic Les Paul guitars from the late 1950s and are used on many of today's Custom Shop guitars. - 2ply
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily.
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily.
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily.
12-inch precision ruler for the construction and repair of musical instruments, made out of long-lasting stainless steel.
One volume and 2 tone replacement knobs for your Strat
For use on 24 spline pots as commonly found on US-made guitars.
For use on 24 spline pots as commonly found on US-made guitars.
For use on 24 spline pots as commonly found on US-made guitars.
For use on 24 spline pots as commonly found on US-made guitars.
For use on 24 spline pots as commonly found on US-made guitars
For use on 24 spline pots as commonly found on US-made guitars.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Green.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Grey.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lemon.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lime.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mauve.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mustard.
- Model: P365HCD-P. - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Orange.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Pink.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Red.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Sky.
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Tan.
Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing, Mono 2-Conductor.
High-Quality Switchcraft Jack J11 Input/Output Mono Jack Pack of Six (6)
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 12 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 15 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 18 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 21 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 3 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms.
