-
Toggle Switch Side with Knob, Black switch tip. -
Output 9 volts / 1000mA. Equipped with a noise reduction circuit. Input voltage 100-240V. -
'- Trapezoid Bone Nut Blank - Measures : 53 x 10 x 4,5/6 mm - Material: Bone - Made in Japan -
For use on 24 spline pots as commonly found on US-made guitars. -
Pickup Selector Switch Cap for Stratocaster. -
Good stomp-box effects switch (Double Pole, Double Throw) -
'- Medium Tension Cuatro strings - Made of Black Nylon - Made in USA -
One volume and 2 tone replacement knobs for your Strat -
Our vintage cloth push-back wire is 22AWG stranded wire, with textile braid made by Gavitt. This is the same wire used by Fender. -
For use on 24 spline pots as commonly found on US-made guitars -
For use on 24 spline pots as commonly found on US-made guitars. -
Relic Series products are limited to specific models and options. -
Classic knob for Jazz Bass. Plastic. -
Pickup Selector Switch Cap for Stratocaster. Constructed in resistant plastic. -
Sale!
Leather Guitar Strap. Genuine Leather. -
This graphite nut will work for most Gibson, or similar style guitars and basses. -
3 Way Pickup Selector Toggle Switch. The switch tip is plastic and replaceable. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing 7-string humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing 7-string humbucker pickups. -
These saddles use the same manufacturing technique, with a nickel plating applied directly onto the steel body, to provide consistent vintage tone. -
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
- Replacement pickguard for Jazz Bass
- 3-Ply
-
- Closed Humbucker Cover
- These are the same covers preferred by many specialty guitar makers and musicians.
- Black plated pickup cover for building or repairing humbucker pickups.
-
This template is perfect for any guitar shop installing pickups. -
Build or repair pickups with our quality parts. Fiber flatwork (black vulcanized fiber). -
Humbucker Pickup Model Impact Distortion High output and raw distorted heavy sound while retaining clarity. Extra coil windings produce fat sound while great harmonics can be jumped out of the amp! -
10-hole keeper bar for 49.2 mm spacing. The metal spacer bar is designed for use with soap bar P-90 pickups. The spare holes are for the pickup mounting screws. -
1 Switchcraft 3-way toggle switch. 1 Switchcraft output jack. 4 Pots 500K Long Shaft CTS Brand. 2 Orange Drop, 100V Poliéster of .022uf. WD Copper Shielding Foil 8" X 12". 60" Braided-shield push-back guitar circuit wire 22AWG inner conductor, 12" Non-shielded push-back guitar circuit wire 22AWG white. 24" Non-shielded push-back guitar circuit wire 22AWG black. -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
-
- Serie: original 150. - Model: S-S150M. - Material: Pure Nickel. - Style: Medium. - Gauge: .011, .014, .018, .028, .038, .049. - Use: Electric Guitar. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Tan. -
12-inch precision ruler for the construction and repair of musical instruments, made out of long-lasting stainless steel. -
Professional quality, round-head protractor an ideal tool for luthiers to accurately gauge angles in guitar work: neck joint trajectories, peghead pitches, saddle slot angles, and tool setup. -
WD Music Electrosocket Jackplate For Telecaster -
Potentiometer 250K Logarithmic For audio control -
This template is perfect for any guitar shop installing pickups. -
Designed to protect the luthier's hands from light-duty applications such as sanding guitar bodies and finishing guitar details. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing lipstick pickups. -
Important Dimensions - US and metric where applicable Length- 1 11/16 in., 43mmThickness- 5.9mm, .233 in.Height- 5/16 in. high at the highest point with a flat bottom -
- Gauge: 0.010", 0.016", 0.024", 0.036", 0.046", 0.056". - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- A set of 26 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
Safe and resistant mat for repair and maintenance work on your guitar, bass, violin, and other string instruments. -
'- Blade Width: 48mm - Plane Body Length: 210mm - Plane Body Width: 60 mm -
- Handle: Japanese white oak. - Head length: 115 mm - Overall Weight: 196 gr. - Overall length: 300 mm. - Head Diameter: 35 mm. -
- Use: This saw is used to cut sheets to place incrustations in the wood.
- Total length: 365 mm.
- Blade length: 130 mm.
- Handle length: 130 mm.
- Blade thickness: 0.60 mm.
- TPI: 14 teeth per inch.
- Made in Japan.
-
Stomp-box effects switch 3PDT Blue - 9 pins -
Set of 5 jacks with the metal nut. Centre pin 2.1mm -
Japanese IKEUTI Carving Knife Right Bevel -
- Mesh:600#; Micron:20μm, Mesh: 1000#; Micron:15μm. - Stone size: 179*60*7.9mm/7”x2.36”x0.31". - Stone Weight: 230g/0.50Lb. -
Shinex Sanding Wood Sheet 800 grit, usable in both, water and oil. -
Knob cover type selector Gibson Technical Features: Plastic -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Mauve. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Pink. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Green. -
- Serie: Silver. - Tension: Hard. - Model: SCG HT - Gauge: .0285, .0327, .0410, .030, .036, .044. - Use: Classical Guitar. -
- Use: The fine teeth of the locking saw allow a precise cut of the curved shapes.
- The long and thin blade makes this a very versatile and practice tool.
- Total length: 337 mm.
- Blade length: 100 mm.
- Handle length: 130 mm.
- Blade thickness: 0.70 mm.
- TPI: 20 teeth per inch.
- Made in Japan.
-
Ground and tempered stainless steel gauge, dual-etched with metric and imperial graduations, specially designed for luthiers to check the inner hole diameter easily. -
- A set of 13 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. -
2-way sanding block for Ukuleles 12” (305mm) / Flat -
Back Plate for Stratocaster Style Guitars Black -
Standard Pick up P Bass Configuration, 3-Ply -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut. -
Back Plate for Stratocaster Style Guitars 10.5mm pitch -
Standard Pick up P Bass Configuration, 3-Ply -
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
These files help create a rounded groove to ensure that the strings sit properly on the nut. This professional file helps you get the job done right. -
Very high-quality double-edged nut file. This file helps create a rounded slot to ensure that the strings sit correctly in the nut. -
2-way sanding block for Ukuleles 16” (406mm) / Flat -
Sale!
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
Here's a Bigsby ® setup for a Tele® that really works! It uses a WD ® custom made bridge and adapter plate, along with the Bigsby® top of the line, sand-cast B5 bridge to form an unbeatable combination. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Grey. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Red. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Sky. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lemon. -
- Model: P365HCD-P. - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Orange. -
Studs And Anchors Only For Stop Tailpiece Fits Gibson Guitars -
Schaller Pickup Ring, Model: Plastic, Straight -
Hosco Metal Knob in Black finish Telecaster Style -
Set of 3 Two-Way Sanding Block for the sanding frets and leveling fingerboards. -
Stratocaster Candy Apple Red Body. Made in Japan from North American alder. Three-piece center joined. -
- Use: Oire Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Material: These professional-grade chisels are made from high-carbon steel (White # 2 steel) laminated to low-carbon backing steel. - Blade Width: 42 mm. - Length: The overall length is approximately 216 mm (8.5"), Blade length is 60 mm / 2.36”. - Hardness: They harden to more than HRC 65 so they will maintain a sharp edge for much longer than a western equivalent chisel. - Handle: They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Long series pin punch with extended parallel pin -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Humbucker. - Color: Gold Plated. - Material: Steel. -
Here's a Bigsby® setup for a Tele® that really works!It uses a WD custom made bridge and adapter plate, choose from Bigsby's licensed B50 or top of the line sand-cast B5 to form an unbeatable combination. -
Grits: 150, 400, and 1000. Size: 65 x 18 x 9mm, 2 Fingerboard Guards, a String Spreader. -
Orange Drop .047 µF 225P series Polyester film/foil capacitors, 100v most used for Strat single-coil pickup tones,Made of durable high-grade polyester, and favorites for vintage restorations or new builds. -
Potentiometer 500K Linear For tone control. -
- Made of cork and TPE* , high-performance, textured, anti-slip surface to improve traction.
- Thickness: 4.5mm
- Size: 120 cm x 47in / 50 cm x 19.5inch
- Durable yet soft to help avoid scratching your instrument.
- For repair and maintenance on your guitar, bass, banjo, mandolin, ukulele, violin, and other string instruments.
- *TPEs are a family of rubber like materials that combine the characteristics of rubber with the recyclability and processing advantages of plastics.
