-
Sale!
- Instrument: Electric Guitar. - Finish: Black. - Saddle Material: Steel. - Measures: Please look at the diagram in the pictures. - Block Height: 40mm. -
Sale!
- Instrument: Electric Guitar. - Finish: Cosmo Black. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
Sale!
- Instrument: Electric Guitar. - Finish: Chrome. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
Sale!
- Instrument: Electric Guitar. - Finish: Gold. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
- Size: #6 - Head Diameter 0.26 in - Material: Solid Brass - Head Type: Oval Head - Drive Type: Phillips - Application: Wood / Guitar Hardware / General Use -
Sale!
- Material: High-quality chrome-plated steel, strong and durable. - Compatibility: Designed for Telecaster guitars with Bigsby B5 or B50 bridges. - Dimensions: Standard Tele mounting, precise fit for pickup and bridge. - Finish: Polished chrome for stability, sustain, and professional look. -
Sale!
- Model: MG-T - SL.
- Tuner Configuration: 3 per side.
- Gear ratio: 15:1.
- Post Length: 20mm. - Bushing Type: Vintage press-fit (non-threaded), designed for push-in installation — no hex nut required
- Hardware included: bushings, washers, and screws.
- Finish: Nickel. -
Sale!
– Model: SD90-MG-T-SL
– Tuner Configuration: 3 per side.
– Gear ratio: 15:1.
– Post Length: 21.5mm. Not Staggered. They are suitable for Gibson Guitars and similar instruments with wide head necks.
– Hardware included: bushings, washers, and screws.
– Finish: Nickel. -
- Material: Precision-machined brass (high-density alloy)
- Process: CNC machined for consistent geometry and accuracy
- Bottom Radius: 9.5" (≈ 241.3 mm) for exact fingerboard matching
- Top Surface: Fully flat for stable press contact
- Dimensions: 63.5 × 13.9 × 3 mm (2.5" × 0.55" × 0.12")
- Surface Finish: Fine-machined (Ra 3.2 μm) for smooth, even pressure distribution
-
- Material: Precision-machined brass (high-density alloy)
- Process: CNC machined for consistent geometry and accuracy
- Bottom Radius: 7.25" (≈184.15 mm) for exact fingerboard matching
- Top Surface: Fully flat for stable press contact
- Dimensions: 63.5 × 13.9 × 3 mm (2.5" × 0.55" × 0.12")
- Surface Finish: Fine-machined (Ra 3.2 μm) for smooth, even pressure distribution
-
- Length: 150mm (6") - Cutting edge: 75mm (3") - Width: 3.1mm (0.123") - Thickness: 1.7mm (0.66") -
- Model: GP-LBCP41. - Finish: Chrome. - Weight: g/item: 5.2gr. - Dimensions: Please look at the diagram in the pictures. -
- Model: GP-LBCP35. - Finish: Brass Chrome Plated. - Weight: g/item: 5.2gr. - Dimensions: Please look at the diagram in the pictures. -
Sale!
- Material: Cork. - Edge: Beveled. - Length: 110mm. - Width: 56mm. - Thickness: 30mm. - Use: Perfect to sand any surface. -
- Material: Precision-machined aluminum for lightweight durability and structural integrity - Compatibility: Designed for Danelectro®-style lipstick pickups - Function: Provides stable mounting base for pickup assembly and internal components - Finish: Natural aluminum with corrosion-resistant properties - Application: Ideal for repairs, restorations, and custom pickup builds -
Sale!
– Model: SG301 – MG-T – 04. – Tuner Configuration: 3 per side. – Gear ratio: 18:1. – Post Length: 21.5mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
Sale!
- Part Number: 841358105104. - Finish: Aged Chrome. - Measures: Please look at the diagram in the pictures. -
Sale!
- Radius: 1.5mm, 1.6mm, 1.7mm, and 1.8mm. Size: 50mm diameter x 7mm thick. - Weight: 95g. Material: Steel in Nickel-plated. - Disk design: Palm size, easy to hold, control, and see the filing point. - Concave file with 600 grit diamond. - Made in Japan. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing Filtertron style humbucking pickups. -
- Vibrato Model: Bigsby® B5 Original (USA, non-licensed) - Configuration: Designed for flat-top solid body guitars (Tele-style) - Conversion System: GTI No-Drill Telecaster® Conversion Plate - Material: Die-cast aluminum vibrato unit with steel mounting plate - Finish: Chrome plated for durability and corrosion resistance -
Orange Drop .047 µF 225P series Polyester film/foil capacitors, 100v most used for Strat single-coil pickup tones,Made of durable high-grade polyester, and favorites for vintage restorations or new builds. -
Sale!
- Series: Original Kalamazoo Line.Manufacturing Method: Cast. - Manufacturing Material: Aluminum. - Part Number: 609722127677. - Approximate Weight: 354 grams/12.5 oz. - Overall Length: 8 ¾" /222.3 mm. - Overall Width: 3 5/8" /92.1 mm. -
3 Way Pickup Selector Toggle Switch. The switch tip is plastic and replaceable. -
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade Length: 255mm. - Overall Length: 385mm. - Made in Japan. -
Sale!
– Instrument: Electric Guitar. – Finish: Chrome. – Saddle Material: Alloy Steel. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: 35G1600 - 2W. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included: Screws. - Finish Gold. -
- Vibrato Model: Bigsby® B50 Licensed. - Conversion System: GTI Telecaster® No-Drill Conversion Kit. - Material: Die-cast aluminum vibrato with steel conversion plate - Finish: Chrome plated. - Compatibility: Designed for Telecaster® style guitars with standard bridge footprint. -
- Series: Original Kalamazoo Line. - Manufacturing Method: Cast. - Manufacturing Material: Aluminum. - Overall Length: 4.75"/120.65mm. - Overall Width: 3.7"/93.98mm. - B5 Vibrato: Mounting Kit. -
Sale!
- Tuning Machine Conversion Bushings. - Finish: Nickel-plated. - Measures: Please look at the diagram in the pictures. -
– Model: 510UB – Type: Wraparound bridge / tailpiece – Mounting: Stud Lock-PAT – Series: Gotoh 510 (premium line) – Use: Electric guitars (wraparound style) – Saddle Material : Hard Zinc – Finish: Gold -
– Model: 510UB – Type: Wraparound bridge / tailpiece – Mounting: Stud Lock-PAT – Series: Gotoh 510 (premium line) – Use: Electric guitars (wraparound style) – Saddle Material : Hard Zinc – Finish: Black -
- Model: 510UB - Type: Wraparound bridge / tailpiece - Mounting: Stud Lock-PAT - Series: Gotoh 510 (premium line) - Use: Electric guitars (wraparound style) - Saddle Material : Hard Zinc - Finish Chrome -
- Model: GTC201 - Saddles: Brass (6 individual saddles) - String Spacing: 10.8 mm - Total String Spacing: ~54 mm - Mounting: String-through body - Finish: Chrome -
Sale!
- Total length: 190mm - File length: 100mm - A product of Hosco. - Made in Japan. -
Sale!
– Model: SG381 MG AB07. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushing, washers, and screws. – Finish Gold. -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
Sale!
- Blade Length: 9” (220mm). - Overall Length: 13 ½”(340mm). - Handle: wooden. - Made in Japan. -
- Inner diameter: 92 mm. - Thickness: 1.2mm (cut by saw). -
Wood parquetry design rosette for classical guitar. -
- Inner diameter: 92mm. - Thickness: 1.2mm (cut by saw). -
- Inside diameter: 92mm. - Outside diameter: 112mm. - Thickness: 1.2mm (cut by saw). -
Wood parquetry design rosette for classical guitar. -
- Inner diameter: 118mm - Outer diameter: 131mm - Thickness: 1.5mm (cut by saw) -
- Material: 2-ply PVC (Black). - Size: 300 x 195 mm (11.81" x 7.68"). - Thickness: 1.6 mm (0.063"). - Use: Custom pickguard fabrication for electric guitar. - Origin: Made in Japan. -
Sale!
– Material: 1-ply PVC. – Color: Black. – Length: 290mm / 11 7/16". – Width: 220mm / 8 5/8”. – Thickness: 1mm. – Use: Building a Pickguard Sheet for Guitar. -
- Gauge: .016" .024" .032" .040" .058" . - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: .048" .065" .078" .095" .105" .130". - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Model: SG301-P4N - Configuration: 3 tuners per side (3L + 3R) - Gear Ratio: 18:1 - Finish: Chrome - Post Length: 22.2 mm (7/8”) -
- Model: SG301-P4N - Configuration: 3 tuners per side (3L + 3R) - Gear Ratio: 18:1 - Finish: Black - Post Length: 22.2 mm (7/8”) -
- Model: SG301-P4N - Configuration: 3 tuners per side (3L + 3R) - Gear Ratio: 18:1 - Finish: Gold - Post Length: 22.2 mm (7/8”) -
- Gauge: 050" .058" .062" .078" .093" .109" .125". - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
Sale!
- Gauge: 0.054”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.026”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.017”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.016”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.042”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.125”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.011”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge Sizes: 0.010″, 0.013″, 0.017″, 0.024″, 0.032″, 0.036″, 0.046″, 0.056″. - Material: Hardened Stainless Steel. - Cutting Length: 115mm (4 1/2”). Rounded edges. - Total Length: 150mm. - Width: 12mm. - Made in Japan by Hiroshima Yasuri. -
- These truss rod covers are used on Gibson's iconic Les Paul guitars from the late 1950s and are used on many of today's Custom Shop guitars. - 2ply -
Sale!
- Model: P203B-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Gold. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. -
- Model: SD90 - SL. - Tuner Configuration: 3 per side. - Gear ratio: 15:1. - Post Length: 20mm. - Hardware included: bushings, washers, and screws. - Finish: Gold. -
- Long 130mm. - Wide 85mm. - Thick: 5mm. -
Sale!
– Model: GTC-102. – Configuration: 6 string. – String spacing: 52.5mm. – Instrument: Electric Guitar. – Measures: Please look at the diagram in the pictures. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing humbucker pickups. -
- 1 roll, width 6mm X 18 meters long (20 yards). - 1 roll, width 12mm X 18 meters long (20 yards). - 1 roll, width 20mm X 18 meters long (20 yards). - Thickness: 0.1mm. - Adhesion: 1.08N/10mm. - Tensile strength: 68.1N/15mm. -
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing 7-string humbucker pickups. -
– Toothed file length: 87mm (one side only). – Diamond File length: 40mm (one side only). – Nut file size: 95mm x 12mm. – Filing width: 0,013" (0,33 mm). -
Sale!
- Gotoh Strap Buttons for Guitars and Basses. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. -
Sale!
– Model: SG381-P4N. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushing, washers, and screws. – Finish: Chrome. -
– Model: SG381 - 07. – Tuner Configuration: 6 in a line. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushing, washers, and screws. – Finish: Black. -
- Knob : ABS Black. - Type: 3-way. - Weight:14.2 gr. -
- Made of cork and TPE* , high-performance, textured, anti-slip surface to improve traction.
- Thickness: 4.5mm
- Size: 120 cm x 47in / 50 cm x 19.5inch
- Durable yet soft to help avoid scratching your instrument.
- For repair and maintenance on your guitar, bass, banjo, mandolin, ukulele, violin, and other string instruments.
- *TPEs are a family of rubber like materials that combine the characteristics of rubber with the recyclability and processing advantages of plastics.
-
Hosco Control Plate for Telecaster with screws. -
Sale!
- Model: SD90 - SL.
- Tuner Configuration: 3 per side.
- Gear ratio: 15:1.
- Post Length: 20mm.
- Hardware included: bushings, washers, and screws.
- Finish: Nickel. -
Sale!
- Material: Solid Chrome-Plated Brass for maximum durability and sustain. - Compatibility: Designed for guitars equipped with Bigsby B5, B50, and similar tailpieces. - Saddles: Six fully adjustable saddles for precise intonation on every string. - Action: Unique rocking design that maintains tuning stability with Bigsby use. -
Long series pin punch with extended parallel pin -
- Length: 26.67mm. - Height: 12.46mm. - Thickness: 9.65mm. - Brand: Guitar Tools International. - Finish: brass. -
Sale!
Leather Guitar Strap, Genuine Leather. -
- Length: 550mm. - Width: 40mm. - Thickness: 2mm. -
– Model: 404BO-5. – Configuration: 5 Strings. – String Spacing: 18mm. – Saddle Material: Brass. – Instrument: Electric Bass. – Finish: Black. – Measures: Detailed measurements are available in the accompanying diagram. -
Sale!
- Model: 404BO-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Brass. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. - Plate Material: Hard Zinc. -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 9 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- TBP1: Bridge Stud hole diameter = 5/8 in. Bridge Stud hole spacing = 3 in. ctr to ctr Material = Steel.- BSS1: Center to Center Stud Spacing= 3 in. E to E String Spacing= 56mm String Pitch(adjustable)= 11.2 mm Body Insert Hole Diameter= 27/64 in. Metric Threaded Studs. -
- Model: SG381 - 01. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushings, washers, and screws. - Finish: Gold. -
- Model: SG381 - 07. - Tuner Configuration: 6 in a line. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
Sale!
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Gold. -
- Fits 6.35mm (1/4") string posts into 10.0mm peg holes. - Includes six bushings per set. - Made in Japan with an aged nickel finish. -
- Martin-style pickguard for acoustic guitar. - Standard Teardrop shape. - Material: PVC plastic. - finish: White, glow. -
Sale!
- Model: Tune-o-matic. - Configuration: 6 string. - String spacing: 2-1/16". - Instrument: Electric Guitar. - Finish: Black. -
Sale!
– Model: SG301 – MG – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
Sale!
Sheets specially designed to repair the finish of your instrument, Kovax Finish Repair Set includes: 1 of each grit:800, 1300,1500, 2000, 2500, and 3000-grit. 1 Flat Toleblock, 1 Oval Toleblock. -
– Model: GTC-101. – Configuration: 6 string. – String spacing: 52.5mm. – Instrument: Electric Guitar. – Finish: Chrome. – Measures: Please look at the diagram in the pictures. -
– Model: SD91 – MG – 05MA (Plastic Button) – Tuner Configuration: 6 in a line. – Gear ratio: 15:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Nickel. -
– Model: SG381 – M01 (Plastic Knob) – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
Sale!
- Gauge: 0.093”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Material: High Carbon Steel. - Key Feature: Double-sided, Fine (25 teeth per inch), and an extra-fine side(45 teeth per inch approx). - Detachable rubber grip handle. - Blade length: 220mm. - Overall Length: 340mm. - Made in Japan. -
Sale!
- Length: 55mm. - Height: 8.5mm. - Thickness: 3.2 mm. - Brand: Hosco. -
Sale!
- Length: 56mm. - Height: 6mm. - Thickness: 10mm. - Brand: Guitar Tools International. - Finish: brass. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing humbucker pickups. -
Sale!
- Thickness: 0.50mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
- Material: Aluminium. - Radius: 16”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
- Material: Aluminium. - Radius: 10”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
- Material: Aluminium. - Radius: 12”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
- Material: Aluminium. - Radius: 9.5”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
Sale!
- Head: 11mmx9mm dia. - Length: 78mm. - Weight: 4g. -
Sale!
- Length approximately: 6 1/2" (165mm). - Blade width: 9mm. - Right Bevel. -
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
- Material: Aluminium. - Radius: 7.25”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
- Long: 230mm. - Width: 35mm. - Thickness: 3mm. -
Sale!
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
Sale!
- Model: SG381 - MG-T - 01. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 20mm. - Hardware included: bushing, washers, and screws. - Finish: Gold. -
- Model: GE-101A. - Chrome finish. - Anchor bushings: M8x1.25, 25mm height. - Mounting Hole Center to Center: 82mm. - Measures: Please look at the diagram in the pictures. -
Sale!
– Model: SG301 – MG-T – 04. – Tuner Configuration: 3 per side. – Gear ratio: 18:1. – Post Length: 20 mm. – Hardware included: bushing, washers, and screws. – Finish: Gold. -
Sale!
- Handle: Steel. - Overall Weight: 84 gr. - Overall length: 223mm. - Head Diameter: 14mm. -
Sale!
- Model: SD91 - MG - 05M. - Tuner Configuration: 6 in a line. - Gear ratio: 15:1. - Post Length: 20mm. - Hardware included: bushings, washers, and screws. - Finish: Nickel. -
Sale!
- Tolecut sheet: Each abrasive sheet has 8 self-stick squares - Kovax Finish Repair Set includes: 1 of each grit: 800, 1200,1500, 2000, 2500, and 3000-grit. - Instrument use: guitar, ukulele, mandolin, or banjo nut. - Measures: 1-1/8" x 1-3/8" (29mm x 35mm). -
Sale!
Wood parquetry design rosette for classical guitar. -
- Instrument: Electric Guitar. - Finish: Relic. - String Spacing: 10.8mm - Measures: Please look at the diagram in the pictures. - Mounting Hole Center to Center: 64.8mm. -
Sale!
Truss Rod Nuts slotted shape Length 25mm, with an M5 hole. -
Sale!
– Model: SG301 – MG – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Black. -
Sale!
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 18 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
- Use: Oire Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Material: These professional-grade chisels are made from high-carbon steel (White # 2 steel) laminated to low-carbon backing steel. - Blade Width: 21 mm. - Length: The overall length is approximately 216 mm (8.5"), Blade length is 60 mm / 2.36”. - Hardness: They harden to more than HRC 65 so they will maintain a sharp edge for much longer than a western equivalent chisel. - Handle: They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Model: FB30. - Gear ratio: 1:20. - Post Length: 31.2mm. - Hardware included: bushing, washers, and screws. - Finish Aged Nickel. - Measures: Please look at the diagram in the pictures. -
This kit includes the following products:- Guitar Neck Rest: Made of cork, to protect the finish of the guitar neck. Compact, solid, sturdy and lightweight. Weight: 11.4 oz. Electric Guitar Height: 3 3/4”. Acoustic Guitar Height: 3 11/16”.
- Guitar and Bass Mat: Made of cork and TPE , high-performance, textured, anti-slip surface to improve traction. Thickness: 4.5mm. Size: 120 cm x 47in / 50 cm x 19.5inch
-
Sale!
- Model: SG381 - 07. - Tuner Configuration: 6 in a line. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
Sale!
- Model: 35G-450 - 1W. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included: bushings, washers, and screws. - Finish: Gold.
