-
- 1 roll, width 6mm X 18 meters long (20 yards). - 1 roll, width 12mm X 18 meters long (20 yards). - 1 roll, width 20mm X 18 meters long (20 yards). - Thickness: 0.1mm. - Adhesion: 1.08N/10mm. - Tensile strength: 68.1N/15mm. -
- Length: 150mm (6") - Cutting edge: 75mm (3") - Width: 3.1mm (0.123") - Thickness: 1.7mm (0.66") -
Sale!
- Head: 11mmx9mm dia. - Length: 78mm. - Weight: 4g. -
- Gauge Sizes: 0.010″, 0.013″, 0.017″, 0.024″, 0.032″, 0.036″, 0.046″, 0.056″. - Material: Hardened Stainless Steel. - Cutting Length: 115mm (4 1/2”). Rounded edges. - Total Length: 150mm. - Width: 12mm. - Made in Japan by Hiroshima Yasuri. -
Sale!
- Handle: Steel. - Overall Weight: 84 gr. - Overall length: 223mm. - Head Diameter: 14mm. -
Sale!
- File edges: Curved. - Product use: bone, plastic, and tusq nuts. Not suitable for metal nuts. - Double edge. - Total length: 150mm. - Cutting length: 115mm. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Sale!
- Material: Hardened Stainless Steel, Satin Chrome Finish - Length: 150 mm / 6 in - Scale: Metric (mm / 0.5 mm) + Imperial (1/32" / 1/64") - Marking: Photo-Etched, Black Filled Graduations - Origin: Made in Japan (Shinwa) -
Sale!
- Material: Cork. - Edge: Beveled. - Length: 110mm. - Width: 60mm. - Thickness: 30mm. - Use: Perfect to sand any wood surface. -
- Length: 83mm. - Width: 33mm. - Height: 0.1mm. - Scale Length: approx. 600 - 900mm. - Made in Japan. -
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
Sale!
- Length: 65mm. - Width: 18mm. - Thickness: 9mm. - 1000 grit. -
- Flat-head design for clean fret removal with minimal damage.
- Precision-ground steel jaws for accurate grip under fret wire.
- Ergonomic non-slip handle for control and comfort.
- Made in Japan by Hosco – professional luthier-grade tool. - Note: Not intended for cutting wire – designed for pulling only. -
– Model: BFS1. – Finish: Brass. – Use: Fret Setter. -
-
- Gauge: 0.042”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Size: Medium. - Dimensions: 3.95 x 0,82 x 017 inch. - Crowning surface: 3.60” (91.5mm) * 0.08” (2.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- Gauge: 0.020”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Total length: 190mm - File length: 100mm - A product of Hosco. - Made in Japan. -
This kit includes the following products:- Guitar Neck Rest: Made of cork, to protect the finish of the guitar neck. Compact, solid, sturdy and lightweight. Weight: 11.4 oz. Electric Guitar Height: 3 3/4”. Acoustic Guitar Height: 3 11/16”.
- Guitar and Bass Mat: Made of cork and TPE , high-performance, textured, anti-slip surface to improve traction. Thickness: 4.5mm. Size: 120 cm x 47in / 50 cm x 19.5inch
-
- Gauge: 0.017”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.026”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- A set of 26 steel gauges designed for luthiers especially very useful to allow the precision filing of nut slot depths.
- Simply stack the appropriate gauges on the fingerboard, against the front edge of the string nut, and file the nut slot down to the top of the stack.
-
Sale!
- Material: Cork. - Edge: Beveled. - Length: 110mm. - Width: 56mm. - Thickness: 30mm. - Use: Perfect to sand any surface. -
Sale!
- Grit: 400. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
- Size: Jumbo. - Dimensions: 3.95 x 0.82 x 0.17 inch. - Crowning surface: 3.60” (91.5mm) * 0.12” (3.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- Truss rod box wrench 7 mm for truss rod hex nut -
- Blade length with rib: 120mm. - Width: 0.60mm. -
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
Sale!
- Gauge: 0.028”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Thickness: 0.57mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
- Gauge: 0.011”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Measurement range: 0 - 150mm ( 0 - 6 inches). - Mode: Dual Reading. - Material: Metal. -
Sale!
- Tolecut sheet: Each abrasive sheet has 8 self-stick squares - Kovax Finish Repair Set includes: 1 of each grit: 800, 1200,1500, 2000, 2500, and 3000-grit. - Instrument use: guitar, ukulele, mandolin, or banjo nut. - Measures: 1-1/8" x 1-3/8" (29mm x 35mm). -
Sale!
- Gauge: 0.053”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.040”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Material: Aluminium. - Radius: 16”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
- Length: 550mm. - Width: 40mm. - Thickness: 2mm. -
Sale!
Truss rod box wrench 8 mm for truss rod hex nut -
Sale!
- 10mm: for mini potentiometers/blend pots / Gotoh SG series. - 11mm: for potentiometers / push-pull control pots. - 1/2": for CTS potentiometers. - 16mm: for the knurled nut of Japanese toggle switches. - Multi: for the knurled nut of U.S.-made toggle switches or others. - 1 1/18" (30mm) square. -
Sale!
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
- Gauge: 0.054”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 3 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
12-inch precision ruler for the construction and repair of musical instruments, made out of long-lasting stainless steel. -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge
