-
Sale!
600 Sanding Wood Sheet 80, 120, 240, 400, 600, 800, 1500, 3000t, usable in both, water and oil. -
Sale!
- Length: 65mm. - Width: 18mm. - Thickness: 9mm. - 1000 grit. -
Sale!
- 10mm: for mini potentiometers/blend pots / Gotoh SG series. - 11mm: for potentiometers / push-pull control pots. - 1/2": for CTS potentiometers. - 16mm: for the knurled nut of Japanese toggle switches. - Multi: for the knurled nut of U.S.-made toggle switches or others. - 1 1/18" (30mm) square. -
Very handy and practical fret bender. It's a plier with a round groove, where you can insert the tang of your frets and bend them as you like. -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12 mm. -
Sale!
- Length: 83mm. - Width: 33mm. - Height: 0.1mm. - Scale Length: approx. 600 - 900mm. - Made in Japan. -
Sale!
- Size: Large (Guitars and basses). - Length: 190mm (7.5″). - File length: 100mm (3.93″). - Radius: 3 mm. - Made in Japan. -
Sale!
- Truss rod box wrench 7 mm for truss rod hex nut -
- Use: Tataki Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Blade Width: 3 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
- Material: Aluminium. - Radius: 12”. - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Building a radius on a fingerboard or leveling frets. -
Sale!
- Material: Cork. - Edge: Beveled. - Length: 110mm. - Width: 60mm. - Thickness: 30mm. - Use: Perfect to sand any wood surface. -
– Set of 2 rubber sanding blocks for finish repair.
– Includes Flat (33mm x 27mm) and Oval (33mm x 26mm) blocks.
– Compatible with Kovax Finish Repairing Papers.
– Precision-molded for surface leveling and control.
– Made in Japan with professional-grade materials. -
- 1 roll, width 6mm X 18 meters long (20 yards). - 1 roll, width 12mm X 18 meters long (20 yards). - 1 roll, width 20mm X 18 meters long (20 yards). - Thickness: 0.1mm. - Adhesion: 1.08N/10mm. - Tensile strength: 68.1N/15mm. -
Sale!
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
Sale!
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade Length: 255mm. - Overall Length: 385mm. - Made in Japan. -
Sale!
- Head: 11mmx9mm dia. - Length: 78mm. - Weight: 4g. -
Sale!
- Truss Rod Wrench 5/16": Fits Gibson, ESP, and Yamaha - WRE-I516. - Truss Rod Wrench 1/4”: Fits Taylor and Guild - WRE-I14. - Truss Rod Wrench 8mm - Fits Les Paul - WRE-8.0. - Truss Rod Wrench 7mm: Fits Jackson, Ibanez, and PRS - WRE-7.0. -
Sale!
- File edges: Curved. - Product use: bone, plastic, and tusq nuts. Not suitable for metal nuts. - Double edge. - Total length: 150mm. - Cutting length: 115mm. -
Sale!
- Guitar Fret Cutter. - Dimensions: Jaw width: 1 inch. Total length: 7 inches. Weight: 9.6 oz. - Hardness: HCR60. - Use: Fretwork. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Sale!
- Grit: 150. - Length: 65mm. - Width: 18mm. - Height: 9mm. -
Sale!
Saw to make fret slots on the guitar fretboard, Width: 0.60 mm. -
Sale!
Japanese Fret Slot Cleaning saw, Hosco Brand - Made in Japan. -
Sale!
- Truss rod box wrench 1/4" for truss rod hex nut. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
- Material: Aluminium. - Radius: 7.25", 9.5", 10" 12", and 16". - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Putting a radius on a fingerboard or leveling frets. -
G&W Gluing Block for Radiused Fretboards - Radius 10" -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
- Handle: Japanese white oak. - Head: Hexagonal. - Overall Weight: 300 gr. - Overall Length: 332mm. - Head diameter: 26.5mm. -
- Use: This saw is used to cut sheets to place incrustations in the wood.
- Total length: 365 mm.
- Blade length: 130 mm.
- Handle length: 130 mm.
- Blade thickness: 0.60 mm.
- TPI: 14 teeth per inch.
- Made in Japan.
-
- Use: The fine teeth of the locking saw allow a precise cut of the curved shapes.
- The long and thin blade makes this a very versatile and practice tool.
- Total length: 337 mm.
- Blade length: 100 mm.
- Handle length: 130 mm.
- Blade thickness: 0.70 mm.
- TPI: 20 teeth per inch.
- Made in Japan.
-
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
'- Blade Width: 48mm - Plane Body Length: 210mm - Plane Body Width: 60 mm -
Sale!
- Handle: Japanese white oak. - Use: Fretworking. - Overall Weight: 300 gr. - Head Material: Solid Copper. - Overall length: 300mm. -
- Handle: Japanese white oak. - Head length: 115 mm - Overall Weight: 196 gr. - Overall length: 300 mm. - Head Diameter: 35 mm. -
Sale!
- Radius: Medium. - Series: 5002. - Cutting Width: 2.68mm (0.105") -
Japanese IKEUTI Carving Knife Right Bevel -
- Length approximately: 6 1/2" (165mm). - Blade width: 9mm. - Right Bevel. -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
- Grit: 400 - Length: 230mm. - Width: 150mm -
High-quality Bastard steel leveling file, glued to a handle of wood, for easier fret leveling job.
-
-
-
Sale!
- Total length: 190mm - File length: 100mm - A product of Hosco. - Made in Japan. -
- Size: 0.010. - Total length: 150mm. - Blade length: 115mm. -
Sale!
- Thickness: 0.50mm. - Tooth spacing: 0.9mm. - Blade length: 15mm. - Total length: 160mm. - Angle Fret saw: 45º.
