-
Sale!
- Gauge: 0.045”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.056”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.105”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.046”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.093”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.011”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.125”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.042”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.017”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.054”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Width: 1.47mm (0.058"), (Small frets). - Width: 2.68mm (0.105"), (Medium frets). - Width: 3.88mm (0.153"), (Large frets). -
Sale!
- Gauge: .048" .065" .078" .095" .105" .130". - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: .016" .024" .032" .040" .058" . - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Inner diameter: 118mm - Outer diameter: 131mm - Thickness: 1.5mm (cut by saw) -
Sale!
Wood parquetry design rosette for classical guitar. -
Wood parquetry design rosette for classical guitar. -
- Inner diameter: 92mm. - Thickness: 1.2mm (cut by saw). -
Wood parquetry design rosette for classical guitar. -
- Inner diameter: 92 mm. - Thickness: 1.2mm (cut by saw). -
Sale!
Wilkinson Alnico V telecaster pickup, Great combination for classical electric sound. -
- 2 height-adjustment screws M2 5 x 25 - 2 springs - 4 mounting screws M2 2 x 19 -
- 2 height-adjustment screws M2 5 x 25 - 2 springs - 4 mounting screws M2 2 x 19 -
Build or repair pickups with our quality parts. Fiber flatwork (black vulcanized fiber). -
10-hole keeper bar for 49.2 mm spacing. The metal spacer bar is designed for use with soap bar P-90 pickups. The spare holes are for the pickup mounting screws. -
Schaller Pickup Ring, Model: Plastic, Straight -
Humbucker frame with universal holes for multiple configurations. This premium baseplate has a 52mm spacing and is made of raw nickel silver. -
Humbucker frame with universal holes for multiple configurations, This premium baseplate has a 50mm spacing and is made of raw nickel silver. -
- Botton Plate of Lipstick Pickup for building your own pickup
- Made of Brass
-
Sale!
These are the same covers preferred by many specialty pickup makers. Original PAF-correct covers for humbucker pickups. -
Standard gold cover for telecaster rhythm/neck position pickup. -
- Model: PP-BPB - Material: Raw Brass - Spacing: 49.2 mm - Hole: Center hole - Finish: Unfinished (no plating or polishing) -
Sale!
- Use: Standard pickguard for acoustic guitars. - Pickguard Type: Teardrop. - Features: Self-adhesive back layer and protective front film. - Color: Transparent. - Material: Celluloid. -
- Martin-style pickguard for acoustic guitar. - Standard Teardrop shape. - Material: PVC plastic. - finish: White, glow. -
- Pickguard Type: Pickguard for Stratocaster. - Color: 3-ply Tortoise (W/B/W/T) - Mounting Holes: 11. - Thickness: 2.4mm (0.09”). - Material: Celluloid. -
- Brand: Musedo. Model: CP-63 - Type: Clip-On Contact Pickup - Pickup Design: Piezo Contact Pickup - Output Connector: 1/4" (6.35mm) Mono Plug. - Cable Length: Approx. 2.5m (8.2 ft.) - Maximum Clip Opening: Approx. 25mm - Power Requirement: None -
Sale!
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing humbucker pickups -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing 7-string humbucker pickups. -
- Closed Humbucker Cover
- These are the same covers preferred by many specialty guitar makers and musicians.
- Black plated pickup cover for building or repairing humbucker pickups.
-
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing lipstick pickups. -
Sale!
These are the same covers preferred by many specialty guitar makers and musicians, Nickel Silver Raw pickup cover for building or repairing 7-String humbucker pickups. These premium humbucker covers are made of nickel silver raw. -
Sale!
- Humbucker Cover - 50mm
- These are the same covers preferred by many specialty guitar makers and musicians.
- Original PAF-correct covers for humbucker pickups.
-
Sale!
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Vintage style spacing for humbucker pickups. -
These are the same covers preferred by many specialty pickup makers, Brass Chrome Plated pickup cover for building or repairing Filtertron style humbucking pickups. -
Sale!
These are the same covers preferred by many specialty pickup makers, Brass Gold Plated pickup cover for building or repairing Filtertron style humbucking pickups. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing 7-string humbucker pickups. -
Sale!
- Gauge: 0.016”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
These are the same covers preferred by many specialty pickup makers, Nickel silver raw pickup cover for building or repairing 7-string humbucker pickups. -
– Model: GTC-202. – Finish: Chrome. – Saddles: Steel. – String spacing 10.8mm – Mounting hardware included. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: Sd91 - 05m. - Tuner Configuration: 6 in Líne. - Gear ratio: 15:1. - Post Length: 24.6mm. - Hardware included: bushings, washers, and screws. - Finish: Relic. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing humbucker pickups. -
- Material: Zinc block, stamped steel saddles. - Finish: Chrome (body), Nickel (saddles). - String Spacing: 52.5mm. - Made in: Korea. -
– Instrument: Electric Guitar. – Finish: Black. – Saddle Material: Alloy Steel. – String Spacing: 10.8mm. – Block Height: 41.2mm. -
- Replacement pickguard for Jazz Bass
- 3-Ply
-
- Material: 2-ply PVC (Black). - Size: 300 x 195 mm (11.81" x 7.68"). - Thickness: 1.6 mm (0.063"). - Use: Custom pickguard fabrication for electric guitar. - Origin: Made in Japan. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Chrome Plated. - Material: Steel. -
Sale!
- Model: Tune-o-matic. - Configuration: 6 string. - String spacing: 2-1/16". - Instrument: Electric Guitar. - Finish: Black. -
Sale!
- Model: 35G-450 - 1W. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included: bushings, washers, and screws. - Finish: Gold. -
Sale!
- Model: SG381 - MG - 07.
- Tuner Configuration: 6 in a line.
- Gear ratio: 16:1.
- Post Length: 20mm.
- Hardware included: bushings, washers, and screws.
- Finish: Chrome. -
- Series: Original Kalamazoo Line. - Manufacturing Method: Cast. - Manufacturing Material: Aluminum. - Overall Length: 4.75"/120.65mm. - Overall Width: 3.7"/93.98mm. - V5 Adapter: Mounting Kit. -
- Material: Diecast aluminum construction. - External Dimensions: 50.5 mm × 50.5 mm × 30.7 mm (1.98" × 1.98" × 1.20"). - Enclosure Style: 1590LB / RB-1204 format. - Includes one enclosure, one lid, and four mounting screws. - Rubber feet are not included. -
- CTS potentiometers: 500K audio taper configuration - Capacitors: Orange Drop polyester .022µF / 100V (2 units) - Copper shielding foil dimensions: 8" x 12” - Braided-shield wire: 22AWG inner conductor, 60” length - Push-back hookup wires: 22AWG white 12" and black 24” lengths -
- CTS potentiometers: 500K long shaft configuration
- Capacitors: Orange Drop polyester .022µF / 100V (2 units)
- Copper shielding foil dimensions: 8" x 12”
- Braided-shield wire: 22AWG inner conductor, 60” length -
- Designed for Gibson SG style electric guitar wiring configurations. - CTS 500K potentiometers for humbucker pickup applications. - Includes Hosco Made in Japan right-angle 3-way toggle switch. - Orange Drop .022µF 100V polyester capacitors included. - Cloth push-back wiring and copper shielding foil for low-noise installation. -
Shinex Sanding Wood Sheet 80 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 1500 grit, usable in both, water and oil. -
600 Sanding Wood Sheet 600 grit, usable in both, water and oil. -
Shinex Sanding Wood Sheet 3000 grit, usable in both, water and oil. -
- Measurement range: 0 - 150mm ( 0 - 6 inches). - Mode: Dual Reading. - Material: Metal. -
- Instrument: Electric Guitar. - Finish: Black. - Saddle Material: Steel. - Measures: Please look at the diagram in the pictures. - Block Height: 40mm. -
- Instrument: Electric Guitar. - Finish: Cosmo Black. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
– Model: SG381 - 01. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
- Instrument: Electric Guitar. - Finish: Gold. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
Sale!
Truss rod box wrench 8 mm for truss rod hex nut -
Sale!
- Length: 65mm. - Width: 18mm. - Thickness: 9mm. - 1000 grit. -
Sale!
– Model: SG301 – MG – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
Sale!
- Truss rod box wrench 7 mm for truss rod hex nut -
- Flat-head design for clean fret removal with minimal damage.
- Precision-ground steel jaws for accurate grip under fret wire.
- Ergonomic non-slip handle for control and comfort.
- Made in Japan by Hosco – professional luthier-grade tool. - Note: Not intended for cutting wire – designed for pulling only. -
Sale!
- Material: Hardened Stainless Steel, Satin Chrome Finish - Length: 150 mm / 6 in - Scale: Metric (mm / 0.5 mm) + Imperial (1/32" / 1/64") - Marking: Photo-Etched, Black Filled Graduations - Origin: Made in Japan (Shinwa) -
Sale!
- File edges: Curved. - Product use: bone, plastic, and tusq nuts. Not suitable for metal nuts. - Double edge. - Total length: 150mm. - Cutting length: 115mm. -
- Blade length with rib: 120mm. - Width: 0.60mm. -
- Total length (closed): 8 1/4" (210mm).- Jaw width: 19/32" (16mm).- T-shaped safety lock system with center cutout.- High-carbon steel cutting edges, optimized for stainless steel frets. -
- Model: Jumbo. - Size: 7cm (2-3/4” ) long. - Radius: 12-inch radius (300 mm). - Hardness: HV175. - Measures: Please look at the diagram in the pictures. -
- Length: 83mm. - Width: 33mm. - Height: 0.1mm. - Scale Length: approx. 600 - 900mm. - Made in Japan. -
Sale!
- 10mm: for mini potentiometers/blend pots / Gotoh SG series. - 11mm: for potentiometers / push-pull control pots. - 1/2": for CTS potentiometers. - 16mm: for the knurled nut of Japanese toggle switches. - Multi: for the knurled nut of U.S.-made toggle switches or others. - 1 1/18" (30mm) square. -
Sale!
- Size: Medium. - Dimensions: 3.95 x 0,82 x 017 inch. - Crowning surface: 3.60” (91.5mm) * 0.08” (2.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- 1/8" wide lever import size - Mounting hole distance is 1 5/8" center to center -
– Model: SG301 – MG-T – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 18:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish: Gold. -
– Model: SG301 – MG-T – P4N. – Tuner Configuration: 3 per side. – Gear ratio: 18:1. – Post Length: 20mm. – Hardware included: bushings, washers, and screws. – Finish Chrome. -
Sale!
- Truss rod box wrench 1/4" for truss rod hex nut. -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
Shinex Sanding Wood Sheet 120 grit, usable in both, water and oil. -
Sale!
- TBP1: Bridge Stud hole diameter = 5/8 in. Bridge Stud hole spacing = 3 in. ctr to ctr Material = Steel.- BSS1: Center to Center Stud Spacing= 3 in. E to E String Spacing= 56mm String Pitch(adjustable)= 11.2 mm Body Insert Hole Diameter= 27/64 in. Metric Threaded Studs. -
Sale!
- Material: High-quality chrome-plated steel, strong and durable. - Compatibility: Designed for Telecaster guitars with Bigsby B5 or B50 bridges. - Dimensions: Standard Tele mounting, precise fit for pickup and bridge. - Finish: Polished chrome for stability, sustain, and professional look. -
- Made of cork and TPE* , high-performance, textured, anti-slip surface to improve traction.
- Thickness: 4.5mm
- Size: 120 cm x 47in / 50 cm x 19.5inch
- Durable yet soft to help avoid scratching your instrument.
- For repair and maintenance on your guitar, bass, banjo, mandolin, ukulele, violin, and other string instruments.
- *TPEs are a family of rubber like materials that combine the characteristics of rubber with the recyclability and processing advantages of plastics.
-
- Integrated grounding hole allows secure connection of the guitar or bass circuit ground wire for reliable electrical continuity- - CNC machined solid brass construction for increased mass and improved resonance - Overall dimensions: 45 mm (1 3/4") width × 22 mm (7/8") height × 2.5 mm (3/32") thickness - Multi-point spring anchor design for balanced tension distribution - Precision-drilled mounting holes for standard tremolo cavity compatibility - Includes mounting screws, set screw, and Allen key for installation -
Sale!
This Is Bigsby®'s B50 licensed die-cast version of their famous B5 bridge. Commonly used on solid body guitars. -
Sale!
- Model: B50. - Finish: Aluminum. - Measures: Please look at the diagram in the pictures. - Part Number: 609722127639. -
Sale!
- Instrument: Electric Guitar. - Finish: Chrome. - Saddle Material: Steel. - String Spacing: 10.8mm. - Saddle Radius: 350mm. - Block Height: 40mm. -
- Size: #6 - Head Diameter 0.26 in - Material: Solid Brass - Head Type: Oval Head - Drive Type: Phillips - Application: Wood / Guitar Hardware / General Use -
- Model: MG-T - SL.
- Tuner Configuration: 3 per side.
- Gear ratio: 15:1.
- Post Length: 20mm. - Bushing Type: Vintage press-fit (non-threaded), designed for push-in installation — no hex nut required
- Hardware included: bushings, washers, and screws.
- Finish: Nickel. -
– Model: SD90-MG-T-SL
– Tuner Configuration: 3 per side.
– Gear ratio: 15:1.
– Post Length: 21.5mm. Not Staggered. They are suitable for Gibson Guitars and similar instruments with wide head necks.
– Hardware included: bushings, washers, and screws.
– Finish: Nickel. -
- Material: Precision-machined brass (high-density alloy)
- Process: CNC machined for consistent geometry and accuracy
- Bottom Radius: 9.5" (≈ 241.3 mm) for exact fingerboard matching
- Top Surface: Fully flat for stable press contact
- Dimensions: 63.5 × 13.9 × 3 mm (2.5" × 0.55" × 0.12")
- Surface Finish: Fine-machined (Ra 3.2 μm) for smooth, even pressure distribution
-
- Material: Precision-machined brass (high-density alloy)
- Process: CNC machined for consistent geometry and accuracy
- Bottom Radius: 7.25" (≈184.15 mm) for exact fingerboard matching
- Top Surface: Fully flat for stable press contact
- Dimensions: 63.5 × 13.9 × 3 mm (2.5" × 0.55" × 0.12")
- Surface Finish: Fine-machined (Ra 3.2 μm) for smooth, even pressure distribution
-
- Length: 150mm (6") - Cutting edge: 75mm (3") - Width: 3.1mm (0.123") - Thickness: 1.7mm (0.66") -
- Model: GP-LBCP41. - Finish: Chrome. - Weight: g/item: 5.2gr. - Dimensions: Please look at the diagram in the pictures. -
- Model: GP-LBCP35. - Finish: Brass Chrome Plated. - Weight: g/item: 5.2gr. - Dimensions: Please look at the diagram in the pictures. -
Sale!
- Material: Cork. - Edge: Beveled. - Length: 110mm. - Width: 56mm. - Thickness: 30mm. - Use: Perfect to sand any surface. -
- Material: Precision-machined aluminum for lightweight durability and structural integrity - Compatibility: Designed for Danelectro®-style lipstick pickups - Function: Provides stable mounting base for pickup assembly and internal components - Finish: Natural aluminum with corrosion-resistant properties - Application: Ideal for repairs, restorations, and custom pickup builds -
– Model: SG301 – MG-T – 04. – Tuner Configuration: 3 per side. – Gear ratio: 18:1. – Post Length: 21.5mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
Sale!
- Radius: 1.5mm, 1.6mm, 1.7mm, and 1.8mm. Size: 50mm diameter x 7mm thick. - Weight: 95g. Material: Steel in Nickel-plated. - Disk design: Palm size, easy to hold, control, and see the filing point. - Concave file with 600 grit diamond. - Made in Japan. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing Filtertron style humbucking pickups. -
- Vibrato Model: Bigsby® B5 Original (USA, non-licensed) - Configuration: Designed for flat-top solid body guitars (Tele-style) - Conversion System: GTI No-Drill Telecaster® Conversion Plate - Material: Die-cast aluminum vibrato unit with steel mounting plate - Finish: Chrome plated for durability and corrosion resistance -
Sale!
- Series: Original Kalamazoo Line.Manufacturing Method: Cast. - Manufacturing Material: Aluminum. - Part Number: 609722127677. - Approximate Weight: 354 grams/12.5 oz. - Overall Length: 8 ¾" /222.3 mm. - Overall Width: 3 5/8" /92.1 mm. -
3 Way Pickup Selector Toggle Switch. The switch tip is plastic and replaceable. -
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade Length: 255mm. - Overall Length: 385mm. - Made in Japan. -
Sale!
– Instrument: Electric Guitar. – Finish: Chrome. – Saddle Material: Alloy Steel. – Measures: Please look at the diagram in the pictures. -
Sale!
- Model: 35G1600 - 2W. - Tuner Configuration: 3 per side. - Gear ratio: 14:1. - Post Length: 30mm. - Hardware included: Screws. - Finish Gold. -
- Vibrato Model: Bigsby® B50 Licensed. - Conversion System: GTI Telecaster® No-Drill Conversion Kit. - Material: Die-cast aluminum vibrato with steel conversion plate - Finish: Chrome plated. - Compatibility: Designed for Telecaster® style guitars with standard bridge footprint. -
- Series: Original Kalamazoo Line. - Manufacturing Method: Cast. - Manufacturing Material: Aluminum. - Overall Length: 4.75"/120.65mm. - Overall Width: 3.7"/93.98mm. - B5 Vibrato: Mounting Kit. -
– Model: 510UB – Type: Wraparound bridge / tailpiece – Mounting: Stud Lock-PAT – Series: Gotoh 510 (premium line) – Use: Electric guitars (wraparound style) – Saddle Material : Hard Zinc – Finish: Gold -
- Model: GTC201 - Saddles: Brass (6 individual saddles) - String Spacing: 10.8 mm - Total String Spacing: ~54 mm - Mounting: String-through body - Finish: Chrome -
Sale!
- Total length: 190mm - File length: 100mm - A product of Hosco. - Made in Japan. -
– Model: SG381 MG AB07. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 20mm. – Hardware included: bushing, washers, and screws. – Finish Gold. -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
- Model: SG301-P4N - Configuration: 3 tuners per side (3L + 3R) - Gear Ratio: 18:1 - Finish: Black - Post Length: 22.2 mm (7/8”) -
- Gauge: 050" .058" .062" .078" .093" .109" .125". - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge Sizes: 0.010″, 0.013″, 0.017″, 0.024″, 0.032″, 0.036″, 0.046″, 0.056″. - Material: Hardened Stainless Steel. - Cutting Length: 115mm (4 1/2”). Rounded edges. - Total Length: 150mm. - Width: 12mm. - Made in Japan by Hiroshima Yasuri.
