-
Sale!
- Model: Tune-o-matic. - Configuration: 6 string. - String spacing: 2-1/16". - Instrument: Electric Guitar. - Finish: Black. -
They're incredibly handy. Use them in sequence as a final step on freshly-crowned frets, to erase fine file marks and scratches, The grits are color-coded for convenience, Grits: 150, 180, 400 and 1000. Size: 65 x 18 x 9mm Fingerboard Guards -
Safe and resistant mat for repair and maintenance work on your guitar, bass, violin, and other string instruments. -
Sale!
- Material: High Carbon Steel. - Key Feature: Double-sided, Fine (25 teeth per inch), and an extra-fine side(45 teeth per inch approx). - Detachable rubber grip handle. - Blade length: 220mm. - Overall Length: 340mm. - Made in Japan. -
– Material: Cork. – Edge: Beveled. – Length: 110mm. – Width: 60mm. – Thickness: 30mm. – Use: Perfect to sand any wood surface. -
- Width: 41 mm (1-5/8″, R2 size) - Radius: 360 mm (≈14″) - Material: Hardened steel, top-mount design - Finish: Black - Made in Japan by Gotoh -
- Integrated grounding hole allows secure connection of the guitar or bass circuit ground wire for reliable electrical continuity- - CNC machined solid brass construction for increased mass and improved resonance - Overall dimensions: 45 mm (1 3/4") width × 22 mm (7/8") height × 2.5 mm (3/32") thickness - Multi-point spring anchor design for balanced tension distribution - Precision-drilled mounting holes for standard tremolo cavity compatibility - Includes mounting screws, set screw, and Allen key for installation -
Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge -
These saddles use the same manufacturing technique, with a nickel plating applied directly onto the steel body, to provide consistent vintage tone. -
- Thickness: 0.57mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
Sale!
- Size: Medium. - Dimensions: 3.95 x 0,82 x 017 inch. - Crowning surface: 3.60” (91.5mm) * 0.08” (2.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- Size: Jumbo. - Dimensions: 3.95 x 0.82 x 0.17 inch. - Crowning surface: 3.60” (91.5mm) * 0.12” (3.2mm). - Surfaces: Coarse and fine crowning. - Use: For crowning frets after leveling. - Rubber grip for non-slip use. -
Sale!
- Blade Length: 180mm/7.1 inches. - Teeth Pitch: 1.0mm TPI: 25.4. - Cutting Width: 0.46 mm. - Blade Thickness: 0.3mm. -
Sale!
- Blade Length: 180mm/7.1 inches. - Teeth Pitch: 1.5mm. - Cutting Width: 0.52 mm. - Blade Thickness: 0.3mm. -
- Material: High Carbon Steel. - Key Feature: Double-sided, Coarse (11 teeth per inch), and a fine side (25 teeth per inch). - Detachable rubber grip handle. - Blade length: 283mm. - Overall Length: 390mm. - Made in Japan. -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Sale!
- Length approximately: 6 1/2" (165mm). - Blade width: 9mm. - Right Bevel. -
Relic Series products are limited to specific models and options. -
Sale!
- Model: P203B-4. - Configuration: 4 Strings. - String Spacing: 19mm. - Saddle Material: Gold. - Instrument: Electric Bass. - Finish: Chrome. - Measures: Please look at the diagram in the pictures. -
Sale!
- Thickness: 0.53mm. - Blade length: 120mm. - Tooth Spacing: 1.25mm. - Material: Carbon Steel. -
High-Quality Switchcraft Jack J11 Input/Output Mono Jack Pack of Six (6) -
This template is perfect for any guitar shop installing pickups. -
This template is perfect for any guitar shop installing pickups. -
Sale!
- Blade Length: 9” (220mm). - Overall Length: 13 ½”(340mm). - Handle: wooden. - Made in Japan. -
Sale!
- Blade length: 7-inch. - Length: 15-inch. - Teeth per inch: Crosscut 19TPI. - Rip 9TPI. -
Sale!
- Model: SG381 - 07. - Tuner Configuration: 3 per side. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushings, washers and screws. - Finish: Chrome. -
Sale!
- TBP1: Bridge Stud hole diameter = 5/8 in. Bridge Stud hole spacing = 3 in. ctr to ctr Material = Steel.- BSS1: Center to Center Stud Spacing= 3 in. E to E String Spacing= 56mm String Pitch(adjustable)= 11.2 mm Body Insert Hole Diameter= 27/64 in. Metric Threaded Studs. -
Very handy and practical fret bender. It's a plier with a round groove, where you can insert the tang of your frets and bend them as you like. -
- Model: GE-101A. - Chrome finish. - Anchor bushings: M8x1.25, 25mm height. - Mounting Hole Center to Center: 82mm. - Measures: Please look at the diagram in the pictures. -
- Use: Oire Nomi is the standard chisel used by workers who specialize in musical instrument making, door working, furniture making, and carpentry. - Material: These professional-grade chisels are made from high-carbon steel (White # 2 steel) laminated to low-carbon backing steel. - Blade Width: 42 mm. - Length: The overall length is approximately 216 mm (8.5"), Blade length is 60 mm / 2.36”. - Hardness: They harden to more than HRC 65 so they will maintain a sharp edge for much longer than a western equivalent chisel. - Handle: They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Sale!
Wilkinson Alnico V telecaster pickup, Great combination for classical electric sound. -
- Blade length with rib: 120mm. - Width: 0.60mm. -
Sale!
- Radius: Medium. - Series: 5002. - Cutting Width: 2.68mm (0.105") -
– Model: SG381 - 01. – Tuner Configuration: 3 per side. – Gear ratio: 16:1. – Post Length: 22.2mm. – Hardware included: bushings, washers, and screws. – Finish: Chrome. -
Sale!
Sheets specially designed to repair the finish of your instrument, Kovax Finish Repair Set includes: 1 of each grit:800, 1300,1500, 2000, 2500, and 3000-grit. 1 Flat Toleblock, 1 Oval Toleblock. -
- Model: SG381 - 07. - Tuner Configuration: 6 in a line. - Gear ratio: 16:1. - Post Length: 22.2mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
-
- Material: Zinc block, stamped steel saddles. - Finish: Chrome (body), Nickel (saddles). - String Spacing: 52.5mm. - Made in: Korea. -
Sale!
- Model: SD90 - SL. - Tuner Configuration: 3 per side. - Gear ratio: 15:1. - Post Length: 19.5mm. - Hardware included: bushings, washers, and screws. - Finish: Nickel.
