-
Sale!
- Gauge: 0.024”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Model: SD91 - MG - 05M. - Tuner Configuration: 6 in a line. - Gear ratio: 15:1. - Post Length: 20mm. - Hardware included: bushings, washers, and screws. - Finish: Gold. -
Sale!
- Gauge: 0.020”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Gauge: 0.135”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Leather Guitar Strap, Genuine Leather. -
Sale!
- Finished necks are done in clear polyurethane
- 21 Small fret wire. Crown: 2.0mm(W) x 1.0mm(H).
-
Sale!
- Finish: Chrome. - Brand: Hosco. - For GE101T, GE102T Tremolos. - Measures: Please look at the diagram in the pictures. -
Sale!
Back Plate for Les Paul style guitars. -
Sale!
- Gauge: 0.040”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Chrome-plated steel corner protector. - Dimensions: 39.8 mm x 39.8 mm. - Side depth: 31.2 mm. - Mounting hole diameter: 4.5 mm. - Weight: 14.8 grams. -
Sale!
- Gauge: 0.053”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Model: GB707. - Tuner Configuration: 2 Per Side. - Gear ratio: 1:20. - Post Length: 31 mm. - Hardware included: bushing, washers, and screws. - Finish: Chrome. -
- Vintage Leather Guitar Strap - Dimensions: 50 inches/127 cm long. - Finish: Brown. - For Electric and Acoustic Guitar. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Gold Plated. - Material: Steel. -
Sale!
- Vintage Leather Guitar Strap. - Dimensions: 50 inches/127 cm long. - Finish: Top Grain Brown. - Intended use: For Electric and Acoustic Guitar. -
Sale!
– Model: PGHL-2. – Part Number: 609722145633. – Finish: Black. – Measures: Please look at the diagram in the pictures. -
Sale!
- Gauge: 0.028”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.130”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- Vintage Leather Guitar Strap - Dimensions: 50 inches/127 cm long. - Finish: Black. - For Electric and Acoustic Guitar. -
Sale!
- Gauge: 0.058”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Gauge: 0.032”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
– Model: SD91 – MG-T – 05M. – Tuner Configuration: 6 in a line. – Gear ratio: 15:1. – Post Length: 20mm (No staggered). – Hardware included: bushings, washers, and screws. – Finish: Nickel. -
Sale!
- Material: High-quality chrome-plated steel, strong and durable. - Compatibility: Designed for Telecaster guitars with Bigsby B5 or B50 bridges. - Dimensions: Standard Tele mounting, precise fit for pickup and bridge. - Finish: Polished chrome for stability, sustain, and professional look. -
Hosco Stereo Jack w/small terminals, Color: Nickel, For Guitar and Guitar Basses -
- Brand: Hosco. - Type: H-FTN-M - Suitable for: Medium Frets. - Easily cuts through any material of fret wire. - Fret pliers hold fret wire in place. - Easy to use. -
– Complete fretwork tool set, which includes cutter, puller, crowning, and leveling tools.
– Professional-grade tools made from high-durability steel and composites.
– Suitable for fret installation, leveling, crowning, and end dressing. -
Sale!
– Material: 1-ply PVC. – Color: Vintage White. – Length: 450mm / 17 3/4". – Width: 300mm / 11 13/16”. – Thickness: 2.4mm. – Use: Building a Pickguard Sheet for Guitar and Bass. -
Sale!
These are the same covers preferred by many specialty guitar makers and musicians, Nickel Silver Raw pickup cover for building or repairing 7-String humbucker pickups. These premium humbucker covers are made of nickel silver raw. -
– Model: R2. – Finish: Chrome. – Weight: g/item: 37,50 g. – Made in Germany. – Measures: Please look at the diagram in the pictures. -
Sale!
600 Sanding Wood Sheet 80, 120, 240, 400, 600, 800, 1500, 3000t, usable in both, water and oil. -
- Model: WE-1 - Color: Yellow - Dimensions: 9 x 7 x 2.3 cm - Weight: 2.3 oz -
- Dual scale: inches (1/64”) and millimeters (0.25 mm) for precise measurements. - Laser-etched markings for durability and long-term accuracy. - Made from stainless steel, which is resistant to bending and corrosion. - Suitable for electric, acoustic, and bass guitars. -
Sale!
Truss Rod Washer for Gibson Guitar -
- Serie: original 150. - Model: S-S150R. - Material: Pure Nickel. - Style: Regular. - Gauge: .010, .013, .017, .026, .036, .046. - Use: Electric Guitar. -
Standard gold cover for telecaster rhythm/neck position pickup. -
Very handy and practical fret bender. It's a plier with a round groove, where you can insert the tang of your frets and bend them as you like. -
High-quality Smooth steel leveling file, glued to a handle of wood, for easier fret leveling job. -
Sale!
Easy way to make your radius on fretboards. This one to fit Dewalt D26200 -
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing 7-string humbucker pickups. -
Our vintage cloth push-back wire is 22AWG stranded wire, with textile braid made by Gavitt. This is the same wire used by Fender. -
Braided shield wire just like the kind used on all those fabulous Gibson® guitars.#22 AWG 7/30 tinned soft copper cotton braided push back wire with an overall #34 AWG (2 end) tinned copper braid shield -
Our vintage cloth push-back wire is 22AWG stranded wire, with a textile braid made by Gavitt. This is the same wire used by Fender. -
These are the same covers preferred by many specialty pickup makers, Brass chrome plated pickup cover for building or repairing humbucker pickups. -
Humbucker frame with universal holes for multiple configurations, This premium baseplate has a 50mm spacing and is made of raw nickel silver. -
Sale!
These are the same covers preferred by many specialty pickup makers, Brass gold plated pickup cover for building or repairing humbucker pickups -
- 2 height-adjustment screws M2 5 x 25 - 2 springs - 4 mounting screws M2 2 x 19 -
- 2 height-adjustment screws M2 5 x 25 - 2 springs - 4 mounting screws M2 2 x 19 -
- 2 height-adjustment screws M2 5 x 25 - 2 springs - 4 mounting screws M2 2 x 19 -
- Blade Length: Approximately 10 inches (250mm), providing ample cutting surface for efficient material removal. - Blade Width: 1.3 inches (33mm) at its widest point, ensuring stability and control during use. - Material: High-carbon steel with multi-directional cutting teeth for enhanced durability and precision. -
Speed knobs' fumble-free shape is easy to wrap a pinkie around. -
Sale!
This Fender® electric guitar nut (common for Stratocaster®s or Telecaster®s) is precut and slotted to make your replacement faster and easier compared to having to spend the time shaping and cutting yourself plus give you all the great benefits of tone that a true bone nut offers. Pre-shaped with a curved bottom to match a 7.25-inch radius neck slot just like the original vintage Strat®s! -
WD Music J-Bass Pickup Cover Square Shape This pickup cover is typically mounted over the top of both the strings and pickup, -
Humbucker frame with universal holes for multiple configurations. This premium baseplate has a 52mm spacing and is made of raw nickel silver. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Gold Plated. - Material: Steel. -
Sale!
These are the same covers preferred by many specialty guitar makers and musicians Gold chrome-plated pickup cover for building or repairing 7-string humbucker pickups. -
For use on 24 spline pots as commonly found on US-made guitars -
Sale!
- For left-handed bassists. - Configuration: 4 in a line. - Finish: Nickel. - Includes bushings and screws. -
Pickguard mounting bracket for Les Paul® and similar solid body archtop guitars. -
Replacement Parts for your instrument hard case, Chrome Plated. -
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 12 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
- Pickguard Type: Pickguard for Stratocaster. - Color: 3-ply Tortoise (W/B/W/T) - Mounting Holes: 11. - Thickness: 2.4mm (0.09”). - Material: Celluloid. -
Hosco Control Plate for Telecaster with screws. -
Sale!
Wilkinson Alnico V telecaster pickup, Great combination for classical electric sound. -
Nickel Bass Guitar String Bushing Ferrules Set (4), This set of 4 string ferrules are commonly used on string-thru-body basses mounted directly into the back of the instrument body where the strings pass through to the bridge. -
- Length: 50.5mm/1.98". - Width: 50.5mm/1.98". - Height: 30.7mm/1.20". -
- Underlay/Shim/Spacer for Schaller 3D-5 bass bridge. - Height: 3mm. - Finish: Black. - Made in Germany. -
– Material: 1 Ply PVC. – Color: Ivory. – Length: 450mm / 17 3/4″. – Width: 300mm / 11 13/16”. – Thickness: 2mm. – Use: Building a Pickguard Sheet for Guitar and Bass. -
These are the same covers preferred by many specialty pickup makers, Nickel Silver Raw pickup cover for building or repairing humbucker pickups. -
- Botton Plate of Lipstick Pickup for building your own pickup.
- Made of Brass.
-
Kluson replacement strap buttons for Gibson -
P-102B Back Plate for Les Paul style guitars. -
P-102I Back Plate for Les Paul style guitars. -
- Material: Aluminium. - Radius: 7.25", 9.5", 10" 12", and 16". - Length: 450 mm. - Width: 70mm. - Thickness: 30mm. - Use: Putting a radius on a fingerboard or leveling frets. -
Knob cover type selector Gibson Technical Features: Plastic -
- Model: GTC-12. - Finish: Chrome. - Saddles: Hard Zinc. - String spacing: 10.5mm - Measures: Please look at the diagram in the pictures. -
- Finish: Gold. - Brand: Hosco. - Measures: Please look at the diagram in the pictures. - For EV510T, NS510T, 510T, VS100N VG300, VS401, VS401V Tremolos. -
Material: Steel. Finish: Gold Plated. Curly edge for better grip. -
High-quality Bastard steel leveling file, glued to a handle of wood, for easier fret leveling job.
-
- Potentiometer 500K Logarithmic
- For audio control
-
For use on 24 spline pots as commonly found on US-made guitars. -
- Kakuri chisel leather case.
- Can hold up one chisel.
- The tool on the photos is not included.
-
Sale!
Stick-on rhythm treble switch plate for electric guitar. -
- Model: P365HCD-P - Type: 10-hole Diatonic harmonica. - Key: C (Do mayor). - Features: Quality reed plates produce a free-flowing sound. - Finish: Lime. -
– Toothed file length: 87mm (one side only). – Diamond File length: 40mm (one side only). – Nut file size: 95mm x 12mm. – Filing width: 0,016" (0,41 mm). -
– Toothed file length: 87mm (one side only). – Diamond File length: 40mm (one side only). – Nut file size: 95mm x 12mm. – Filing width: 0,013" (0,33 mm). -
An excellent tool to bevel your frets. You can use it at 90º or 35º inclination. Made of European hard wood (oak or ash). -
- Model: 3D-4. - String radius 20". - String spacing: 21mm. - Finish: Black Chrome. - Measures: Please look at the diagram in the pictures. -
This is a real bone nut blank sized for vintage Fender® instruments. It has an equal radius on the top and bottom. Enhance your tone and increase your instruments sustain while adding a more durable and longer-lasting material to one of the most important contact points on your instrument. Please note this part comes without string slots and requires professional installation and modification using proper tools. -
Sale!
- Use: Tataki Nomi is the standard chisel used for musical instrument making, furniture making, and carpentry. - Blade Width: 3,6,9,12,15,18,21 and 24 mm. - Length: The overall length is approximately 225 mm. - Hardness: They harden to more than HRC 63 so they will maintain a sharp edge for much longer than a western equivalent chisel. - They feature red oak handles fitted with steel rings finished with a top of ready-to-use mushrooms. -
Good for repairing the finishing, This product is used to obtain a fine finish when repairing guitar bodies and necks, Grits #2500. -
Kovax Finish Repairing Papers 1200grit, orange -
Shinex Sanding Wood Sheet 240 grit, usable in both, water and oil. -
- Fit: Electric Guitar. - Position: bridge and neck. - Type: Mini-Humbucker. - Color: Chrome Plated. - Material: Steel. -
- Gauge: 0.087”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
- knob: Metric size with M4 x.7. - The overall height: is 2" (50mm). - Mounting Depth: 7/8' (23.5mm). - Mounting Hole Diameter: Fits a 1/2" with almost 3/8" (9mm) threaded section. -
-
For use on 24 spline pots as commonly found on US-made guitars -
Sale!
- Model: 3D-4. - Support: Reels. - Surface: Gold. - Measures: Please look at the diagram in the pictures. - Weight g/item: 267. -
Shinex Sanding Wood Sheet 120 grit, usable in both, water and oil. -
- Grit: 400 - Length: 230mm. - Width: 150mm -
Sale!
- Total length: 6 1/2" (165mm). - Blade width: 12mm. - Made in Japan. -
Sale!
- Blade Length: 180mm/7.1 inches. - Teeth Pitch: 1.0mm TPI: 25.4. - Cutting Width: 0.46 mm. - Blade Thickness: 0.3mm. -
Sale!
- Dimensions: 45 x 5 x 9mm. - Made in Japan. -
Sale!
- Dimensions: 42.5 x 3 x 5.5mm - Made in Japan. -
Sale!
- Dimensions: 40 x 3.5 x 6mm. - Made in Japan. -
Sale!
- Dimensions: 70 x 3.0 x 6mm. - Made in Japan. -
Sale!
- Dimensions: 70x2.5x6mm. - Made in Japan. -
Sale!
- Dimensions: 40 x 3.0 x 6mm. - Made in Japan. -
Sale!
- Dimensions: 180 x 5 x 10mm. - Made in Japan. -
Sale!
- Gauge: 0.106”. - Material: Hardened Stainless Steel. - Cutting length: 115mm / 4 1/2”. - Length: 150mm total. - Width: 12mm. - Made in Japan. -
Sale!
- Radius: 15" and 20". - Length: 5 3/4. - Wide: 3 3/8”. -
Sale!
- Thickness: 0.50mm. - Tooth spacing: 0.9mm. - Blade length: 15mm. - Total length: 160mm. - Angle Fret saw: 45º. -
- Model: 3D-5. - Support: Reels. - Configuration: 5 Strings. - Surface: Chrome. - Measures: Please look at the diagram in the pictures. - Weight g/item: 278.
